Results 1 to 8 of 8

Thread: My first show laser build, 3W+ total output

  1. #1
    Join Date
    Mar 2023
    Location
    United States
    Posts
    5

    Laser Warning My first show laser build, 3W+ total output

    Hello,

    I just finished building my first show laser. I custom machined all of the mounts and the optical table. It has one 445nm 1600mW, one 520nm 600mW, and two 638nm 700mW diodes. This adds up to 3.6W but I'm assuming some loss with the optics. The analog drivers I designed and made myself. The galvos are 23kpps eBay ones that work well enough for beam shows and simple graphics. I know it is not as well made as some of the others on this forum, but it's decent and works great. Still have to add a cooling fan for the heat sink underneath the optical table, and maybe a way to isolate the optical table from the intake and exhaust area to prevent dust. Feel free to ask any questions!
    Attached Thumbnails Attached Thumbnails IMG_5844.JPG  

    IMG_5845.JPG  

    IMG_5826.JPG  

    IMG_5839.JPG  

    IMG_5881.JPG  

    IMG_5882.JPG  


  2. #2
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,603

    Default

    Quote Originally Posted by lostbeam488 View Post
    Hello,

    I just finished building my first show laser. I custom machined all of the mounts and the optical table. It has one 445nm 1600mW, one 520nm 600mW, and two 638nm 700mW diodes. This adds up to 3.6W but I'm assuming some loss with the optics. The analog drivers I designed and made myself. The galvos are 23kpps eBay ones that work well enough for beam shows and simple graphics. I know it is not as well made as some of the others on this forum, but it's decent and works great. Still have to add a cooling fan for the heat sink underneath the optical table, and maybe a way to isolate the optical table from the intake and exhaust area to prevent dust. Feel free to ask any questions!
    noce job good to see people are still home brewing!

  3. #3
    Join Date
    Feb 2007
    Location
    Fort Mill, SC USA
    Posts
    1,513

    Default

    That's awesome and WAY nicer than my first build. It may have cost you more than a production laser, but I'm sure you learned lots along the way and can take pride in having built it yourself from scratch. Nice work!

    -David
    "Help, help, I'm being repressed!"

  4. #4
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,957

    Default

    Nice

    Those "Blue Boxes" require thinking to work with. Job well done.

    Steve
    Last edited by mixedgas; 08-13-2024 at 02:52.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  5. #5
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,475

    Default

    That's an amazingly compact design for your first build! What's even more impressive is that you designed your own diode drivers. That's very cool!

    What software are you using to drive it?

    Adam

  6. #6
    Join Date
    Mar 2023
    Location
    United States
    Posts
    5

    Default

    Quote Originally Posted by dkumpula View Post
    That's awesome and WAY nicer than my first build. It may have cost you more than a production laser, but I'm sure you learned lots along the way and can take pride in having built it yourself from scratch. Nice work!

    -David
    Thanks! Believe it or not, it only costed me $250 in parts! I had access to a mill so the machining only cost me my time and $20 for aluminum stock.

  7. #7
    Join Date
    Mar 2023
    Location
    United States
    Posts
    5

    Default

    Quote Originally Posted by buffo View Post
    That's an amazingly compact design for your first build! What's even more impressive is that you designed your own diode drivers. That's very cool!

    What software are you using to drive it?

    Adam
    Thanks! I'm currently using LaserShowGen and a Helios Laser DAC. It would be cool to try an FB4 and QuickShow/Beyond, but that's a bit out of my price range currently haha.

  8. #8
    Join Date
    Mar 2023
    Location
    United States
    Posts
    5

    Default

    Quote Originally Posted by mixedgas View Post
    Nice

    Those "Blue Boxes" require thinking to work with. Job well done.

    Steve
    These boxes were the only enclosures I could find that were big enough. I much would have preferred an aluminum extruded enclosure or an old show laser enclosure over a steel sheet metal one, but I made it work. I actually had to shave an inch of extra material off the optical table to make it fit! At some point I will powder coat this one black.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •