Well here it is!

[neutrino]

Well, thank you to all of you for all the information that I have read and learnt bt reading through this forum.

I've finally put together (albeit not quite finished) my 240mW green projector. It still needs a shutter, keyswith, and interlock system. I've ordered the bits and I'm now just waiting for the delivery.

It forgot to take pictures during construction as I was too excited to get it all working so I could 'play'

So here are some pictures.

Thanks for all the advice, again

cheers

Rich

oh bugger, I need to search and find a way of uploading pictures! doh

I'll post again shortly.

[neutrino]

I hope this works

[neutrino]

And a few more. These are of my FB3. I only had enough room to put a DMX IN XLR inplace. I'm not really planning on using DMX but I thought I have the option. I can always split the link inside the XLR plug if I need to run it with other fittings.

[carmangary]

Nice job, good buddy.

[buffo]

Hi Rich;

Thanks for posting the pics. (We like pictures!) You've done a great job so far.

Now, how about some pics of that thing in operation?

Adam

[neutrino]

I've tried taking some pictures of it in operation but they didn't come out well at all. The only camera I have at the moment in on my cell phone.

I will try and borrow a camera over the next couple of days and see what I can capture.

Cheers
Rich

[dsli_jon]

I've finally put together (albeit not quite finished) my 240mW green projector.

So here are some pictures.

Hey Rich! - Nice job brother! And yeah, if this is the kit your friend will bring down 'south', like we were chattin about, you should be all-set with 'Aduana' (customs) - I don' think they'll hassle you at all...

Good show, mate! - BUT I GOTTA ASK - is that a SHOWER DRAIN COVER you're using as a shim for the galvo mount-block?????

IF so, LOL, that's great! - but don't get mad for the razz - on my first enclosed projector, I built everything into a steel tube, that was used as an 'airlock' for those money-transfer vacuum-tube systems, (like in Banks) cause it was real tough, and had a welded-on handle, and a great 'door' for access, etc - but the COVER PLATE I made-up for the front aperture - was a LID FROM A JAR of 'NOXEMA'!!!!! (ya' know, that pastey-crap women use to clean their face, etc) - HAhahaha!! seriously 'ghetto-fab', eh?? - Hey, whatever gets it done, right? You can get 'fancy Newport' mounts once it starts 'raining quid', for sure!!

Don't have any digital pix of that unit - when I get back to NY, I'll scan the old prints I have somewhere, and post em for a good laugh... (but I will say, if I hadn't told ya, I doubt you'd have known, once you see it!)

Cheers..

- J

[neutrino]

Hey amigo,

I'm going with so will prob take this as a spare. Na the plate the galvos are mounted on is not a shower drainer . I'm not sure what it is infact. The mounts I got from Laserworld had fixings on the bottom which didn't help on the 6mm ali sheet I was using. I happed to find this lying around. Its about 1.5mm thick and pre drilled. The mounting holes happend to match up. So i just counter sunk into the ali for the galvo mounting block screwheads so it would fit flush. It also allowed me some movement for alignment aswell. It worked better than I thought .

I hope that made sense.

Be interesting to see your photos though.

Cheers
Rich