Page 3 of 13 FirstFirst 1234567 ... LastLast
Results 21 to 30 of 129

Thread: First RGB

  1. #21
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    232

    Default Case Type

    Hi Pococino,
    The case I am using is an old desktop case (not tower).
    Dimensions are approx 450mm wide, 430mm deep, 155mm high.

    Sorry for slow response - have had no internet for a few days!
    All the best, David

  2. #22
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    232

    Default What sort of red?

    Hi Laserguy216,
    The red I will be using is the 200mw 635 Red from Laserwave that I won in the Cruch raffle.
    It has been made (thanks Bridge!) to match the height of the 473 blue I bought recently from Laserwave.
    According to the tracking, it is now in our local Parcelforce depot, and should be out for delivery on Monday

    Will keep updating as I progress,

    All the best, David

  3. #23
    Join Date
    Jul 2008
    Location
    Rotterdam, Netherlands
    Posts
    789

    Default

    Quote Originally Posted by xntrix View Post
    Hi Laserguy216,
    The red I will be using is the 200mw 635 Red from Laserwave that I won in the Cruch raffle.
    It has been made (thanks Bridge!) to match the height of the 473 blue I bought recently from Laserwave.
    According to the tracking, it is now in our local Parcelforce depot, and should be out for delivery on Monday

    Will keep updating as I progress,

    All the best, David
    coool!!

    exiting times for you!!!!
    I would love to see the beam of that 635!!!

  4. #24
    Join Date
    May 2008
    Location
    Kaliningrad, Russia
    Posts
    45

    Default

    Hi David!
    Cool device, I like it!
    Will you paint it in black (plastic and upper part of the case)?
    I have a projector similar to your one (in old PC case), here it is:
    Attached Thumbnails Attached Thumbnails Before.jpg  

    Run.jpg  

    Inside.jpg  


  5. #25
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    dave-

    projector is looking SUPERB! congrats man. cant wait to see some pics when your red gets in there.

    -Marc
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  6. #26
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    232

    Default

    F.I.V.
    That case looks so good!
    Did you spray it yourself, or get it done proffesionally?
    If you did it yourself - what kind of preparation and paint did you use?
    I have found if I do it myself it scratches very easily.
    Is the display showing internal temperature?
    Great work,
    Regards, David

  7. #27
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    232

    Default Great News!

    My 200mw 635 from Laserwave arrived today
    Thanks to Cruch for organising the raffle, and to Bridge for getting it made to match the height of my 50mw 473
    The laser arrived extremely well packed, with clear instructions in almost faultless English (I know its a cheek to comment on that as I speak no other language - but it is refreshing to see)
    The laser is solidly constructed, with a dedicated PSU/controller.
    Switches in the side enable you to switch between CW, positive or negative TTL or analogue modulation.
    It looks very bright to my eyes compared to a 650 CNI I have.
    I would like to post comparative pics, but it sems difficult to capture the difference on camera. Any suggestions fr settings? I have a rather old 3.3m pixel Nikon 995, but I love it as it is totally manualy controlable, ad can focus down to 20mm.
    I will post more pics etc as I progress.
    Regards, David
    Attached Thumbnails Attached Thumbnails laserwave1.jpg  

    laserwave2.jpg  

    laserwave3.jpg  

    laserwave4.jpg  


  8. #28
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Talking

    Looking good man. Now you just need to turn those lasers ON...

  9. #29
    Join Date
    Jan 2008
    Location
    Stockholm, Sweden
    Posts
    799

    Default

    Quote Originally Posted by xntrix View Post
    It looks very bright to my eyes compared to a 650 CNI I have.
    I would like to post comparative pics, but it sems difficult to capture the difference on camera. Any suggestions fr settings? I have a rather old 3.3m pixel Nikon 995, but I love it as it is totally manualy controlable, ad can focus down to 20mm.
    I will post more pics etc as I progress.
    Regards, David
    Ah, I remember that camera. Fantastic macro mode!

    Unfortunately it's very hard for a camera to capture laser light accurately. Depending on the dyes used in the CCD of your camera it may very well be impossible. The CCD has a response that differs from your eyes', but it usually isn't evident until you use monochromatic light or wavelengths outside the visible spectrum.

    What you could do if you want to compare their brightness is to expand the beams (to avoid saturating your retina) and reduce the power of the 635 until it matches the brightness of the 650.

  10. #30
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,206

    Default

    Hi David,
    Pleasure to hear you had received the red lasers, .
    can't waiting to see your pictures.
    Best regards!
    Bridge
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •