argon laser

[mixedgas]

OK I get it now, one supply and a crossover relay handled the magnets, the second supply had the different ignitor and slight mods to prevent oscillation in the krypton. Probably different fill circuit too. Both PSus have the medical drive box added.

So hopefully under the box bolted to the access door on each supply is a standard SP current card. If not, he's screwed or has to make the medical harness work. If the SP card is there, then he reconnects any missing front panel stuff , carefully documents and removes the wiring in the box, correctly connects the SP card and startup relay, changes the umb connector to the real one and away he goes.

So we need front/back pics of the 265 with the good 20+ pin connector, whats under the access door and inside the UMB.

I hate hacks...

Steve

[VJ AIWAZ]

ok here is the umbilical and the second sp265 (this is the first pic of the second exciter)

[VJ AIWAZ]

umbilical and second ps

[VJ AIWAZ]

no steve you got it all wrong well at least some of it


what i got was two identical but completely separate independent
medical tables both were argon and both had one sp265 each and a sp168 but one was missing

--
John
VJ AIWAZ

[mixedgas]

Ok so all we have to do is get rid of that add on medical box?

I assumed the blue connectored cable was the UMB, my bad. If what you just posted a pic of goes straight to the head, your pretty much ready to go.

Lets be sure , Both 265s have the bolted on little box in the rear?

That male connector goes straight to the head right? If thats the case you have a standard scientific head and any normal 265 will work.

So you in reality got 3 medical sleds?

So shoot pics of the 265 that has the mating connector to what you just sent me a pic of, both front and back, and we'll go from there.

Steve

[VJ AIWAZ]

well if you count the ionics i got 3 but that was not in a table

so i got 2 sleds and one loose ionics

both 265's have that box and the blue plug is on the top of that box
and it mates with the harness from that card cage (i have 3 of those for some reson)

and that blue conector is small less than the size of a quarter

[mixedgas]

Pic of good 265
OK foot in mouth, bad 265 looks bad because it is low res and looks like it only has 4 pins.

Both 265 back panels are identical right?

Steve

[mixedgas]

mixedgas has fallen prey to low res digital imaging , no, he was not smoking something when he wrote those comments. maxima mea culpa.

So what you do next is shoot a pic of the front panel controls and loosen the 4 or so screws on that plate that the box is bolted to. There should be a pc board under that plate, take a pic of it and a pic of the wiring to the add on box. Then open up the add on box and take a pic of whats in there.

I'll get a pair of glasses and bigger screen then my laptop.

You must think I'm crazy,

Steve

[VJ AIWAZ]

ok so both are the same but here is sp265 one

[VJ AIWAZ]

and here is sp265 two