Start of the 3watt RGB

[liteglow]

WOW...

That was some NICE lot of lasers there
(Laserwave, do you want to give me a total of that same lasers to me also?)
I think It would have been cool to restart my RGB Beam-Raid project with the same lasers in all colours...

Btw about your setup, I use a 8mm thick alu plate on my rgb setup.
And I need to make it stronger becouse the plate bends if I hold my hands on the middle!
Total lengt on my setup is 60-70cm ( ? ) ..

So if you only have 5mm.. you for sure need a thicker plate..
If not you need to bend the sides 90 deegre just my tip..


And one more thing about the setup.
I dont se what lasers is what colour, but are you sure thit is the BEST place to mount the lasers?? From where I se it you can replace them and get rid of at least 1-2 mirrors
(The green laser never need to bounce into a mirror, but hit the galvo directly)

But anyway, I LOVE to se the beam output in real life


Filip

[andy_con]

Where did you get those mirror/PBS mounts from Andy?

there just normal adjustable mirror mounts from laserwave

[andy_con]

WOW...

That was some NICE lot of lasers there
(Laserwave, do you want to give me a total of that same lasers to me also?)
I think It would have been cool to restart my RGB Beam-Raid project with the same lasers in all colours...

Btw about your setup, I use a 8mm thick alu plate on my rgb setup.
And I need to make it stronger becouse the plate bends if I hold my hands on the middle!
Total lengt on my setup is 60-70cm ( ? ) ..

So if you only have 5mm.. you for sure need a thicker plate..
If not you need to bend the sides 90 deegre just my tip..


And one more thing about the setup.
I dont se what lasers is what colour, but are you sure thit is the BEST place to mount the lasers?? From where I se it you can replace them and get rid of at least 1-2 mirrors
(The green laser never need to bounce into a mirror, but hit the galvo directly)

But anyway, I LOVE to se the beam output in real life


Filip

beam raider project??

the request from my client was for a fully adjustbale beam table. This may not be the best way of doing things but its what ive been asked to do.

[liteglow]

Ah so it was build to a klient I understand...

Yes I have a project that I did start last winter, but becouse I did buy a house this summer there had been no time left to finnish my project :\
And the money is less on the minus side

But here is my Thread , and there is a link with pictures (just go to Old pictures to se the build from the beginning)

[andy_con]

i cant find anything reltaing to "RGB Beam-Raid project "

got a link?

[Anthony]

i cant find anything reltaing to "RGB Beam-Raid project "

got a link?

here you go

http://www.photonlexicon.com/forums/...ead.php?t=3730

[liteglow]

aaw.. haha sorry ..
I`m so tired that I totally forgot to paste the link ..
Thanx for the help Antony

[andy_con]

very nice, but no video

[stanwax]

Where did you get those mirror/PBS mounts from Andy?

Quazar
as Andy says they are laser-wave items - 25mm dichros in our standard coatings & 3 axis mounts now in stock here in blighty

Rob

[neutrino]

Hey Rob,

Slightly off topic, but do you offer a discount for PL users? I'm after a few 3 axis mounts and a bunch of front surface mirrors.

Cheers
Rich