Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: 30k scanner help

  1. #1
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default 30k scanner help

    got some new 30k scanners, the manual is here -

    www.laser-man.co.uk/test/Z30galvos.pdf

    you can see from the below pic that the 30k is tiny compaired to my dt40's.

    i have tried unplugging ground from x and y but it makes no difference. my dt40's might be slighter larger than normal as bill has tunned them. but the 30ks are so small.

    any help?

    Eat Sleep Lase Repeat

  2. #2
    Join Date
    May 2007
    Location
    Milwaukee WI
    Posts
    1,355

    Default

    Can you measure the actual angle of projection.

    I'm no tuning expert, but you might need to increase the gain a bit. Are you running differential inputs?

  3. #3
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    at a rough measure something like 15-20 degrees

    no idea if im running differential inputs? ive got an original fb3
    Eat Sleep Lase Repeat

  4. #4
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    If you are meaning the Z30 scanners as in the laserpic ones, I believe they have differential inputs..

    If you are running these with a FB3 without the differential output board, you will need to double the input scale
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  5. #5
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    yes the z30's.

    well i have an original fb3 so i dont think its differential.

    how do i double the input scale? tweak the pots on the scanner amps?
    Eat Sleep Lase Repeat

  6. #6
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    yeh, you need to tweak the input size pot
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  7. #7
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    which one each amp has two vr1 and vr6??

    thakns for your help dave
    Eat Sleep Lase Repeat

  8. #8
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Probably best that you speak to laserpic.. I'm not overly familiar with these scanners TBH
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  9. #9
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    just spoke to laserpic

    vr1 in size
    and vr6 is input scale which one should i adjust size?
    Eat Sleep Lase Repeat

  10. #10
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    I believe you should adjust input scale

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •