Wobbly image

[FourDee]

This problem was solved this weekend by connecting signal ground to pin25.

I tried to tune the scanners this weekend using buffo's tutorial. It worked pretty well, but i do notice something in the lasermedia test pattern. The lines do not separate in the diagonal parts, indicating that both scanners are running at the same speed. But instead, the diagonal lines don't join in a point in the center of the sides of the big square. They draw away, making kind of a bend into the sides

Is this because I'm scanning at too big of an angle?

[buffo]

Is this because I'm scanning at too big of an angle?

Possibly. What does the standard ILDA test pattern look like? Can you post pictures of both patterns? Also, what scan angle are you running?

Adam

[allthatwhichis]

This problem was solved this weekend by connecting signal ground to pin25.

I tried to tune the scanners this weekend using buffo's tutorial. It worked pretty well, but i do notice something in the lasermedia test pattern. The lines do not separate in the diagonal parts, indicating that both scanners are running at the same speed. But instead, the diagonal lines don't join in a point in the center of the sides of the big square. They draw away, making kind of a bend into the sides

Is this because I'm scanning at too big of an angle?

Nice! Always like to hear a solution owrked.

As for the test pattern... Mmmmm pictures...

[FourDee]

I figured you would say that
I dont have acces to the laser during the week so ...

[allthatwhichis]

WHAT? I'd die... or go blind... of... photon thirst. You at least have a pointer to carry around right?

[FourDee]

no sir, I just have some beam shots I made during the weekend to get trough the week :'(

[allthatwhichis]

I need an hour or two of personal coherent photon time every day. I could take a day or two off, but would need to take a higher dosage to catch back up... I don't go outside in the sun light though; it is a trade off in radiation.