Some question about Live Pro

[Insanity]

You can use command cues to toggle elements in all tracks, but not individually... Then assign MIDI keys to the command cues... Combine that with toggle active state commands for each track and you will have what you want...

Mark

[Insanity]

Sorry if i resume this thread but now i have livepro... so prepare yourself to be covered by questions

A certain training DVD will answer most, if not all of your questions

Mark

[-=Jim=-]

A certain training DVD will answer most, if not all of your questions

Mark

I couldn't agree more! I learned more in the first 30 minutes of the DVD than in weeks on my own.

[Miss A.]

At the Qlimax rave we had 19x green laser in a circle, they all react as 1 laser. So 1 laser or 19 lasers, i dont see the difference in controlling. Even when you use only 1 track it wil only save you 6 buttons (reset tracks 2,3,4 and active track 2,3,4.)

Hey Maurice,

So Hugo used 19 QM's for this task as well?
I can imagine that he made a special box with 1 ILDA as input (from 1 QM) with 19 outputs for the lasers.

[Insanity]

As far as I know, Hugo has a QM2000 built in to each projector he builds... At least he used to... All of the Lasers I have hired from Hugo, through other companies I was involved in, had a built in QM2000. He also supplied a switch and the cables had power and Ethernet over the same cable...

They came in the form of a laser in one tiny box and the scanhead etc in another, joined together with an optical ring.

Mark

[mccarrot]

Correct, in Each laser head got a QM.net oem fitted.

Some where fibre fed by the Jenlas and some only got the 5W OPSL laser fitted.

In total 22 QM.nets on the network.

For live control he mapped all 19 green 5W heads to track 1 and the 3 RGB's to track 2 and 3.

Wait until you see the new glens playground in the new beyond quickshow.... then it's matrix time with lasers so no need to preprogram matrix setups with showtime.