30K Laser Galvo Scanner Kit for ebay

[ExideGlow]

hello. im new beginner at lasers. is this a good galvo scanner kit to begin with ?

good or bad quality ? come gladly with other suggestion

http://cgi.ebay.com/30K-Laser-Galvo-...QQcmdZViewItem

[Steve Milani]

Hi and welcome on PL

Try to contact following Members here on this Forum:

*aijii* if you live in Australia

*gottaluvlasers* ........for U.S.A.

*stanwax* ..........for U.K. and Europe

Nobody can tell you all advices (and good prices) you need better then them...

Greetings.

[ExideGlow]

I think i wil consider the DT-25 / DT-40 Pro series

[badger1666]

go for dt40 pro's they rock as anyone will tell you, i got the big mirror one's
and they are awesome best money i spent on this hobby dont bother with cheap ebay stuff as i found that out the hard way they just break

[ExideGlow]

go for dt40 pro's they rock as anyone will tell you, i got the big mirror one's
and they are awesome best money i spent on this hobby dont bother with cheap ebay stuff as i found that out the hard way they just break

ok i think i go for the dt40 pro's

how hard is it to tune the scanner ? im very new at this.

[DZ]

Hi and welcome on PL

Try to contact following Members here on this Forum:

*aijii* if you live in Australia

*gottaluvlasers* ........for U.S.A.

*for DT-40Pro/DT-25 scanners in the USA

*stanwax* ..........for U.K. and Europe

Nobody can tell you all advices (and good prices) you need better then them...

Greetings.

I just had to update your list!

[Steve Milani]

I just had to update your list!

Sorry Mate....
I apologize....

[badger1666]

you should not need to tune them they come well tuned just ask jian725
to make sure he well tunes them before they are sent he did a good job on mine

ok i think i go for the dt40 pro's

how hard is it to tune the scanner ? im very new at this.

[Onge]

you should not need to tune them they come well tuned just ask jian725
to make sure he well tunes them before they are sent he did a good job on mine

Maybe he talking about alignment of the lasers, dichros and scanners etc. not the actual tuning of the scanners.

There are some good instructions to be found on this website about all of that, just do a search.
or have a look at this post http://www.photonlexicon.com/forums/...ead.php?t=3707

Onge

[badger1666]

there are some good instuctions about
but i would not recomend a begginner try it ,it also very easy to trash your expensive scanners if they go into self oscilation
because you tweaked the wrong pot to much(been there done that)
best done buy some one who knows there stuff
going by the pm's i had i think he is going by the asumption
you have to tune all new scanners. most of the time they come ok but some need a tweak