Stan_Ham diode driver (analog)

[Things]

I think the layout is a little different, but the circuit is essentially the same.

[Elektrotechniker]

I see. Thanks for the help provided here
I will post again if I am stuck somewhere..

Peter

[Elektrotechniker]

hey again, I completed assembling the driver on a protoboard and hooked the power supply. the led turned on, but the "test-led" which goes to the kathode and anode did not work. i am 99,9% sure that the connections are correct. Here are some pictures of it. I had to use a lot of jumpers and make up my mind where to connect everything since I didn't want to print it directly on pcb. took me a lot of hours.Where do you think is the problem?

http://img25.imageshack.us/img25/7831/1001135i.jpg
http://img265.imageshack.us/img265/2628/1001136z.jpg
http://img827.imageshack.us/img827/4056/1001138.jpg
http://img844.imageshack.us/img844/6669/1001140.jpg

[mophead]

Having trouble following all those wires.

I think I still have one made up on a breadboard. Will try to take a pic later tonight if I didn't tear it back down for something else.

[neutrino]

I'd be interested to see a strip/vero board photo if anyone has one. My electronics skills are very very rusty since school. Would be much easier to copy a working version from someone.

Cheers
Rich

[Elektrotechniker]

Anyone cares to make a schematic on a protoboard for the more "noobie" ones( I am one of those )? That would be greatly appreciated..

[mophead]

We moved recently. It is in a box somewhere......

Will try to find it soon and take pics soon.

[Elektrotechniker]

We moved recently. It is in a box somewhere......

Will try to find it soon and take pics soon.

Thanks!!! This is greatly appreciated.

[flecom]

ok I know this is odd but if I wanted to run this with a -5v-0 mod input (-5 being full brightness) could I just invert the +/- on IC1A?

[Elektrotechniker]

mophead, did you manage to find the schematic yet?