New laser program

[Dr Laser]

have a German laser mofia too?
Steve

Ya ya.. DSP is a German system too

[daedal]

The only issue besides freezing up on me was that the DAC never outputs a full 5v on the laser modulation lines. That happened at the first SELEM....I was very happy Bill was there and had a QM2000 for me !

Maybe my QM2000 is faulty, but does yours really put out 5V? Mine puts out ~4.8V max... My LW green and blue never put out full power because the driver is designed for 5V, but it doesn't get that much...

--DDL

[allthatwhichis]

I am pretty sure the QM was designed to put out just a bit less than 5 volts to protect lasers, but don't quote me... I been wrong before.

[buffo]

Maybe my QM2000 is faulty, but does yours really put out 5V? Mine puts out ~4.8V max...

How are you measuring that 4.8 volts? Because the *only* way you will get an accurate reading is with an oscilloscope. The lasers are turned off during the frame refresh cycle. This is common with many controllers. Thus, if you measure the voltage with a multimeter, you're getting an average of some sort. Gotta hook up the scope to be sure.

I am pretty sure the QM was designed to put out just a bit less than 5 volts to protect lasers, but don't quote me... I been wrong before.

You're thinking of the X-29 / Full Auto controller, Aaron. The QM-2000 should put out a full 5.0 volts. I've checked it on mine (with a 'scope) and verified this.

Adam

[djlightspin]

So where can we purchase this software/hardware? How much for the USB board (if anyone knows)?

[drlava]

So where can we purchase this software/hardware? How much for the USB board (if anyone knows)?

Retail site:
http://www.dtelectronic.cn/production.asp?ArticleID=52

Author's page:
http://laserdesignstudio.de/

Forum (Take your translator)
http://www.laserfreak.net/forum/viewforum.php?f=18


I think the combined package easylase USB + LDS Basic is around 6-700 euro

[tony220171]

Same as Mamba software