Laserworld

[dzodzo]

well in fact i have one more of them the EL-100G dmx projector for about $120 but! it was bought even before that rgy one ...

[White-Light]

Cheer up, they're not all bad. The 600RGY I have makes 670mw.

[smogthemog]

Cheer up, they're not all bad. The 600RGY I have makes 670mw.

Why what have you done t it? Fitted an extra 200mW of Red?

[Laser Zone]

Laserworld = laserterd !!

[White-Light]

Why what have you done t it? Fitted an extra 200mW of Red?

When you see how much red misses the mirrors you appreciate how much is actually in there!

I must admit I'm currently selling it. Its of no use to me for what I want to do although that has nothing to do with the laser quality which seems perfectly good on this one, but more to do with what I'd want a laser for.

[cyaniron]

Hi,
I am not normally religious, but feel that a confession is in order, and that this is the right place.........

I bought a Laserworld CS-400RGY laser, and the 2 red diodes died. I looked around on the internet, including this forum to research, and find a solution. I ended up buying some Rohm red diodes off ebay, and fixed it up so it was almost like new.

I fell for the marketing, and bought one of these, which is excusable, a lot of people have done the same ,but wait for it, this is what I feel guilty about......

I came across someone who had the diodes die on the same laser, and offered to buy his, or repair his. I ended up buying it, and repairing it for my own use.

A few months later the diodes have packed in on both lasers again, and I am left with 2 duffer Laserworld lasers!!.

I know I have let myself down buying another, when I knew they were rubbish!, doh!

Anyway, I see someone has had similar problems with the reds dying.

Here's the thread discussing the potential repair/upgrade of these, if any of you have any ideas to help, or it may help someone with similar problems......

http://www.photonlexicon.com/forums/...937#post115937

[Things]

You asked for it...



And I don't mean the truck.

I read over this post at 4am, I had to try stop myself from waking the rest of the house LOL!

Nice one!

[Photonphart]

Maybe they have seen the light ..... maybe they are changing thier ways

why ? you may ask ....

well i just had an email from them ...... with the dealer pricing ...

and blooming hell .... it well expensive now .... and none of this 2W ( 1.3 garranteed malarky ) it all looks genuine ratings

and a 1.2W RGB projector is retailing at 12,600 euros inc tax

jesus .... i would want 1.2W and a little bit more for that

ok.... dealer pricing is more respectable .... but still expensive and notice that all the cheapy cheap projectors are only being sold until stocks last ...

so it looks as if they want to move into the more respectable high end market and I hope they are now moving into the genuine ratings and genuine prices with genuine quality .... TIME WILL TELL



so take a look


all the best .... ( bollocks thats blown it )

Photonphart

[ElektroFreak]

What have we here? Another Laserworld plant?

[allthatwhichis]

Can I request an IP check please?