N-RGB5W and N-RGB7W hot sale now !!!

[goldenstarwinni]

Hi every one ,
N-RGB5W and N-RGB7W projector hot sale now ,the red is 637nm 900mw from Laserwave , the one with 900mw is single beam, only one laser diode inside,and its sqaure ,it has awesome show .I list the information as below :

N-RGB5W projector :

Decription: Animation laser,DMX512, AUTO,Sound,ILDA control,128 patterns,ANG , IP52 protection rate; 3D Adjustable holders, laserwave dichro mirrors or ILDA connection only .

laser diode power: R>900mw/637nm G>2W/532nm ,B>2W/445nm , laserwave ANG/TTL, 30K modulation,with lasorb

price :USD3750 with DT30 , USD4000 with DT40pro

size and weight : 30*31*32cm, G.W:28KG with flight case ( small weight not only can save shipping cost ,but also can be convenient to take it to your big show .)


N-RGB7W projector :


Decription: Animation laser,DMX512, AUTO,Sound,ILDA control,128 patterns,ANG , IP52 protection rate; 3D Adjustable holders, laserwave dichro mirrors or ILDA connection only .

laser diode power: R>900mw/637nm G>2.2W/532nm ,B>4W/445nm ,laserwave ANG/TTL, 30K modulation,with lasorb

price : USD4350 with DT30 , USD4600 with DT40pro

size and weight : 30*31*32cm, G.W:28KG with flight case ( small weight not only can save shipping cost ,but also can be convenient to take it to your big show .)
For more detail information ,please check our website : www.goldenstarlaser.com or don't hestate to contact me directly ,I would be pleasure to reply you soon.
Best regards
Winni
Golden Star Stage Lighting CO.,Ltd
website : www.goldenstarlaser.com
email: goldenstarwinni@hotmail.com winni@goldenstarlaser.com wenxiaoni716@163.com
MSN : goldenstarwinni@hotmail.com
Skype : goldenstarwinni
PS: Lately we have newest laser projector price list ,if you are interested in it ,please feel free to contact me ,I will reply you soon .

[dave]

LOL 7w with only 1w of red - please@!!!!

[goldenstarwinni]

1W/637 G2000 B4000 DT40 USD4800,this red is combined by 8pcs 170mw red module inside, and its size is round

[Stiffler]

Winni,

You would be better off selling a lower power projector with more red. I think everyone here understands that red is very expensive, and most people would be willing to shell out a few extra bucks for more red; you should at least give the option. Honestly, I would like to see more red than green or blue, as red scatters the least.

[goldenstarwinni]

Eric ,
For N-RGB5000,it has good white balance , just for 7W,just for beam show, for the customers who only care the power,but don't care about the white balance, but 7W is good for club and beam show.Both items were discussed with laserwave and promoted,and we think it is good for market.

For the red, as we known, it is very expensive, 2W price is much more expensive than 1W in 637, but if any customers who like very white balance and want higher power in red, please send us e-mail, the laser can be customized.

We also finish one 12W RGB with 2W/637 G4000 B6000, and it is also very nice balance.We make green higher, because in outdoor performance, green place an important role, green strong or not depends on all brightness, because red and blue is not so obvious in human's eyes.

[andyf97]

typical.

Where will this stop:

900mW red, 2W green and 30watt blue, 33W RGB for 3,000 dollars

[White-Light]

We make green higher..... because red and blue is not so obvious in human's eyes.

Isn't that a reason to give more red and blue than green though, rather than upping the green further? Surely its either RGB or green. You can't really have an RGB that's actually just green when viewed outdoors!

Not picking on you here Winni, you're a great vendor generally!

Just wanted to point out that whereas white balance is important, so is overall balance - eg when you project a green and red fan, its not going to look good if the green sections are very strong and the red is almost invisible and non existent leaving effectively holes in the pattern.

I take your point on cost though. I guess enthusiasts probably want something different from your average power obsessed customer.

[goldenstarwinni]

wow cool ,haha friend .It is very pleasure for us to help u sell out that project RGB33W and help u produce it ,if you can sell that cost .

[kecked]

2W red 500mw green 1W blue(just cuz it is available but run more like 750mw) (add 6215 scanners and should sell for under 5k)

4W red 1W green 1W blue

I like 642nm red.

alternate

170mw 642nm red 50mw 520nm green 80mw 450nm blue All solid state. Why is this is not available in a module yet is beyond me. ($800-1k)

These powers and numbers should be really possible.

red=130
green=150
blue=50
dichros/mirrors/mounts=200
baseplate=50
case=50
power supply/drivers=150

total=$800

[kecked]

also someone should use real mm1s for once so they module is stable
all solid state should not need to be cooled and can be fully sealed.
what I described should be plenty for a hobbyist use at home and be perfect for programming.