LD2000 Basic and Flashback 3 Simultaneous ??

**Silvertyp** · 03-24-2009, 04:10

Hi ,
is it possible to play a 2 projector show with LD2000 and connect the second projector to a Flashback 3 ?
The same question for LivePro,is it possible to use the QM 2000 output for Projector1 and Flashback 3 for Projector 2 ?

Regards , Thomas

**allthatwhichis** · 03-24-2009, 07:05

Good questions...

We either need an expert, or someone with both systems to test.

**Stuka** · 03-24-2009, 07:17

Unless things have changed recently (never say never!!) -

The LD software suite will not run the FB3, and software for the FB3 will not run the QM2000 boards.

Currently, probably the easiest solution - IF you have an FB3 with DMX - is to use the LD2000 / QM2000 suite to trigger cues stored on the FB3 using the DMX capabilities of the two systems.

Otherwise, you would probably need to run the boards from separate computers, and trigger at least one of them manually using one of the live performance packages -LivePRO, LiveQUICK for the FB3, or LivePRO, Showtime LIVE for the QM2000.

**Silvertyp** · 03-24-2009, 08:16

Thanks for the info,
so the only way without DMX to run the two systems synchronous to a musictrack is to use the line in capability of Winamp
and let the live programm of the second set trigger cues,size and intensity by the beat.

**h2so4** · 03-24-2009, 13:44

Hi guys!

I am really interested in this topic, as I own an FB3 and I have just ordered an LD2000 Intro

So I'll do A LOT of testing about these solutions...I'll let you know the results

All the best!

Giovanni

**daedal** · 03-24-2009, 14:22

Originally Posted by Stuka

Unless things have changed recently (never say never!!) -

The LD software suite will not run the FB3, and software for the FB3 will not run the QM2000 boards.

Currently, probably the easiest solution - IF you have an FB3 with DMX - is to use the LD2000 / QM2000 suite to trigger cues stored on the FB3 using the DMX capabilities of the two systems.

Otherwise, you would probably need to run the boards from separate computers, and trigger at least one of them manually using one of the live performance packages -LivePRO, LiveQUICK for the FB3, or LivePRO, Showtime LIVE for the QM2000.

Wasn't this what Bill said at FLEM? Or am I imagining?

--DDL

**dave** · 03-24-2009, 20:10

Wait for Beyond ( I think it will run both at once )

**decix** · 03-25-2009, 08:15

We are waiting for it. But nothing happens...

**keeperx** · 03-25-2009, 13:38

that ant the lasorb...

**daedal** · 03-25-2009, 14:50

Originally Posted by keeperx

that ant the lasorb...

At FLEM, Bill mentioned that a shipment of 100 or so LaserOrb's is being arranged to a member here... can't recall who though

Then again it's probably best so we don't break down his door for a shot at this first shipment

--DDL

Thread: LD2000 Basic and Flashback 3 Simultaneous ??

Thread Tools

LD2000 Basic and Flashback 3 Simultaneous ??

Posting Permissions