The pinout/polarity of this certain diode.

[VioletBeam]

So does that mean

pin 3 = negative
pin 1 = postive

So

| | |
+.. -

and middle is case pin (when your looking at the diagram)


So what would it be like this?

o
....o
o

When you look at it a angle it looks like that.

[mikkojay]

Give this one a try-
This is looking at it from the bottom, pins pointed towards the sky... It is for a phr-803t but from what I see it is the same as what you have.
Don't use too heavy a gauge wire when you solder the leads and hot glue them in place also (what I would suggest)
Hope that helps-
Later, Mike

[VioletBeam]

Give this one a try-
This is looking at it from the bottom, pins pointed towards the sky... It is for a phr-803t but from what I see it is the same as what you have.
Don't use too heavy a gauge wire when you solder the leads and hot glue them in place also (what I would suggest)
Hope that helps-
Later, Mike

FINALLY!

Thank-you somone who understands!

I already saw that picture I was asking if it was the same.

But they were explaining it in there own language.

[heroic]

FINALLY!

Thank-you somone who understands!

I already saw that picture I was asking if it was the same.

But they were explaining it in there own language.

If you want to work on lasers you need to learn the language or you'll be a danger to your diodes, your eyes, and those of others.

[lasersbee]

FINALLY!

Thank-you somone who understands!

I already saw that picture I was asking if it was the same.

But they were explaining it in there own language.

We all understood.... We all speak the same language...
You were the one that didn't understand...

As "heroic" posted "you need to learn the language"...

Jerry