Anyone identify this little guy?

[survey]

Hi ppl, could anyone of you identify this laser module?

It has a big driver with analog modulation, two power supplies, one for 5v and the other for 12v. (to the laser).
In the front it has two galvo amps from cambridge.
A pair of 6210H x and y (i'm affraid that the X galvo is toasted) and another pair of power supplies +-20v?

any idea of the power?
how much could this worth (everything with cables)?

Thanks everyone.

[Banthai]

I dont know about the scanner amps ( but they do look like the medialas microamps )

but the module is manufactured by RGB in Hungary


http://www.rgblasersystem.com/index....id=10&Itemid=3



all the best .... Karl

[survey]

One of my friends have a club, I went there to repair the laser moving head dmx.
He showed me that one in the store and said it had never worked it had been broken since new.
The firm that sold the head, completely changed it with another type of laser.
A 200mw TTL module, and a pair of widemove XT.
I told him that I could be interested in that scrap (as it never worked).
So he told me to make him an offer because it was not needed.
I take the thing to my lab and I found it is analog, the power supplies work nice and the led´s on the driver do a little dance but no Light out of the thing only from the led's.
So I put my lab supply on the blanking and start to increase... and yeahhh
it's going...and going...and wtf...at 4.95V all the room was green!
Also there are another two power supplies for the amps they seem to be ct set power supply, and two CT6210H galvos with X and Y separate mounts. (and all the cables).
The X galvo seem's to be too hard to move (maybe a bearing?) well I plugged it to my Mamba and in fact it overheats (think it's dead) the Y galvo works fine.
So I want to know the power of the LASER, any info of the driver, (as it have too much pots) and how much do I pay for It?

Thanks everyone.

[Onge]

Have to agree with Karl, they definately look like medialas microamp II CTi galvo driver and the CTi II psu.

Can be seen here http://www.medialas.de/scanner.html#driver

Onge (André)

[allthatwhichis]

Nice find... just for your seller's sake; should we start the bidding at $20...

[mixedgas]

Nice find... just for your seller's sake; should we start the bidding at $20...

Gently loosen up the stuck galvo with pliars, if it stays stuck, oh well. If not it may scan. DOnt rip it past the stops, or it will die. You can also test it by swapping it with the working one. I'd do part B first.

Steve

[Phritzler]

Hi!

The green lasser (it is a 500mW!) looks like the RGB lasersystems, what doesn´t mean that it is it! Another hungarian company, and his worker tiimo copied this lasers 1:1. But he didn´t added serialnumbers,etc. So I think that this is the original.
The scanneramps are dafinately the Medialas Microamps.
Greets,
Phil

[-bart-]

It looks like someone already tried replacing the fuse on the right scanner amp.
A new CT galvo will cost you aprox 450 euros.

[LesioQ]

Bears similiarities

http://cgi.ebay.de/DPSS-Laser-gruen-1000-mW-Analog-Moduliert-von-HB-Laser_W0QQitemZ200331260828QQcmdZViewItemQQptZLich t_Effekte?hash=item200331260828&_trksid=p3286.c0.m 14&_trkparms=66%3A2|65%3A10|39%3A1|240%3A1318

Piotr.K

P.S. I'd be interested in 6210 working galvo, or both.