Results 1 to 3 of 3

Thread: AOM Driver-Modulator

  1. #1
    Join Date
    Apr 2009
    Posts
    117

    Default AOM Driver-Modulator

    Was used on a DPSS green
    If anyone is interested
    http://cgi.ebay.com/ws/eBayISAPI.dll...m=230339972432
    Last edited by gogu; 04-28-2009 at 06:39.

  2. #2
    Join Date
    Apr 2009
    Posts
    117

    Thumbs up specs

    Modulator:

      • Material-Acoustic mode
      • TeO2 [S]

      • Acoustic Velocity
        Nom V=650 m/s

      • Optical Wavelength range
        488-635 nm

      • Transmission
        > 95 %, nom 98 %

      • Optical Input / Output polarizations
        Linear / Not specified

      • Aperture
        3 x 3 mm²

      • Carrier frequency / Frequency shift
        110 MHz

      • Separation angle
        90 mrd @532 nm

      • Diffraction efficiency (with TEM00 beam, M²
        £ 1.1) > 85 %, nom 90 %

      • Rise time
        1 μs /mm (min 0.3 μs)

      • Amplitude modulation bandwidth
        > 400 KHz (-3 dB, @ 1 mm)

      • Static extinction ratio
        > 2000/1

      • ** Max optical power density
        5 W / mm² **

      • Input impedance
        Nom 50 W

      • V.S.W.R.
        Nom < 1.5/1

      • RF Power
        < 1 Watt, nom 100 mW

      • Connector
        SMA

      • Size / Weight
        (Lxlxh) 50.9 x 22.4 x 15.8 mm3 / 50 g

      • Operating Temperature
        10 to 40 °C

  3. #3
    Join Date
    Apr 2009
    Posts
    117

    Default ISOMET AOM and matching Analog RF Driver

    I have a couple of used ISOMET AOM 1205C-2 and Analog RF Drivers 232A-1 if anyone is interested.

    specs on the aom
    http://www.isomet.com/FinalWebSite/PDFDocs/AO%20Sheets/1205C-1(2).pdf
    specs on the driver
    http://www.isomet.com/FinalWebSite/PDFDocs/RF%20Sheets/230.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •