@allthat: Is the reason the .lsh file doesn't work with your QM2000 because I made it on an FB3?
@Dr. Lava: I'll zip 'em next time. I think everything that could have gone wrong has gone wrong this time.
Dan
@allthat: Is the reason the .lsh file doesn't work with your QM2000 because I made it on an FB3?
@Dr. Lava: I'll zip 'em next time. I think everything that could have gone wrong has gone wrong this time.
Dan
The bad news is that you do indeedy need LD2000 to output to video.
But if you need anything like that doing just give me a shout (obviously works better for graphic shows than beams).
And the audio being out of sync is not my fault.
I stretched the frame file to the length of the audio track (5:10) but was aware it wasn't in sync.
I noticed that the audio file you included was from a mix (it segues into another track) and ends abruptly so went hunting for that version as a single track.
Four versions later and I gave up and just did the best with what I had, fading the audio out at the 5:04 mark and doing the same with the frame files to "round off" the abrupt ending.
Not just a pretty face !!