I buddy of mine has a chinese laser a " Cir.Rect. Top -- 2 " RGY laser

I am wanting to control it with DMX normally I just create a fixture with 25 or so channels and manually figure out what all the channels do and then make a custom fixture file for the laser. I cant seem to figure out how to do Speed / Movement.

Does anyone have a Manual for this laser or can suggest anything.

So far I have
channel 1 = Draw speed, if you go over channel 215 it goes into auto mode ( once in auto mode you cant get it to go back to standard mode unless you hit channel 255 and then bring it back down to under 215

channel 2 = Gobo
channel 3 = Rotate gobo
channel 4 = gobo size
channel 5 = left to right gobo placement
channel 6 = up and down gobo placement