Pinout Info Help!!

[Ricardo]

Hi Guys,

Newbie after some help here please,

I purchased a PM25 Controller at the weekend which has 2 x 15 Way D series sockets for the output signals I now need to make a converter cable from this 15 Way to 25 Way ILDA plug.

Therefore can someone provide me with a schmatic drawing of the pin connections for each end.

Many thanks

Richard

[p1t8ull]

The pinout doc I have is for a PM20 but AFAIK they are the same, if so -

PM pin 1 (Ground) to ILDA pin 25
PM pin 2 (Shutter) to ILDA pin 13
PM pin 3 (Y+) to ILDA pin 2
PM pin 4 (Y-) to ILDA pin 15
PM pin 5 (X+) to ILDA pin 1
PM pin 6 (X-) to ILDA pin 14
PM pin 7 (Data+)
PM pin 8 (Data-)
PM pin 9 (Red) to ILDA pin 5
PM pin 10 (Green) to ILDA pin 6
PM pin 11 (Blue) to ILDA pin 7
PM pin 12 (Servo A)
PM pin 13 (Servo B)
PM pin 14 (Not Connected)
PM pin 15 (Not Connected)

hth

[Ricardo]

Many thanks for the info, just warming up the soldering iron as we speak!!

Cheers

Richard

[sugeek]

On a search yesterday actually I found the attached document which should be on the FTP server I believe.

Basically the same thing but thought I would throw it out. Oh yeah DZ's breakout board is pretty nifty too, just installed one in the back of my work in progress projector.

-Adam