Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Power Consumtion of projectors

  1. #21
    Join Date
    Feb 2009
    Location
    Surrey, UK.
    Posts
    234

    Default

    Quote Originally Posted by heroic
    They used to be, but since UPSes went mainstream (where outgassing is a problem) and motorcycles switched to gel batteries, they're not that bad. You can get a 4 Ah 12v SLA for under $10 if you are buying in quantity.
    Actually this is a very good point, if you don't mind the hassle of connecting a bunch of small SLA batteries in parallel then that's not a bad option, larger ones however still are pricy.

    Quote Originally Posted by thesk8nmidget View Post
    you guys rock! i have a optima battery that is brand new and i have no use for since its to big for my car. and i play on using that, and you have to trickle charge that (thats why i said that lol)

    but i will be looking for a leisure battery for later on.

    all i need is a couple hours of use so i will try it out later tonight and see how it works.

    thanks again for all the help and gaget that was to much good info would you like a cookie?
    lol

    BTW I found this about the Optmia batteries I am assuming you have the Yellow top as they are the most common...

    Alternator:

    • 13.65 to 15.0 volts, no amperage limit. (I.e. unlimited charge current - see more below)

    Battery Charger:

    • 13.8 to 15.0 volts, 10 amps maximum, 6-12 hours approximate.

    Cyclic Applications:

    • 14.7 volts, no current limit as long as battery temperature remains below 125°F (51.7°C). When current falls below 1 amp, finish with 2 amp constant current for 1 hour.

    Rapid Recharge:

    • Maximum voltage 15.6 volts (regulated), no current limit as long as battery temperature remains below 125°F (51.7°C). Charge until current drops below 1 amp.

    Float Charge:

    • 13.2 to 13.8 volts, 1 amp maximum current, time indefinite (at lower voltage).

    Those are HARDCORE charging specifications, and not one I would subject a normal battery too... But you don't need to be gentle when charging the Yellow top batteries

    It doesn't matter since your not using a fogger, but the moment you do get a genny. Its really not a good idea to fun from DC power.

  2. #22
    Join Date
    Jul 2008
    Location
    Eugene Oregon
    Posts
    952

    Default

    i actually have a Optima Red Top 34/78

    here are the specs.
    980 Cranking Amps
    800 Cold Cranking Amps
    110 Minute Reserve
    55 AH
    10" Length x 6.8" Width x 7.8" Heigth
    Approx. 39 lbs.

    luckily i will have a geni for the time i was talking about but i will probably still use the battery idea another time when im off on my own lol
    -Josh

  3. #23
    Join Date
    Feb 2009
    Location
    Surrey, UK.
    Posts
    234

    Default

    Red top charging specs

    Alternator:


    • 13.3 to 15.0 volts, no amperage limit.

    Battery Charger:

    • 13.8 to 15.0 volts, 10 amps maximum, 6-12 hours approximate.

    Rapid Recharge:

    • Maximum voltage 15.6 volts (regulated), no current limit as long as battery temperature remains below 125°F (51.7°C). Charge until current drops below 1 amp.

    Float Charge:

    • 13.2 to 13.8 volts, 1 amp maximum current, time indefinite (at lower voltage).

  4. #24
    Join Date
    Jul 2007
    Location
    Brooklyn NYC
    Posts
    840

    Default Kill a watt

    you can get one of these kill a watt meter for cheap these days


    http://www.killawattplus.com/?gclid=...FQxM5QodciDzqQ

  5. #25
    Join Date
    May 2008
    Location
    nerdtown, USA
    Posts
    1,165

    Default

    Note that if you slowly discharge a battery to 10.5 volts, you will damage it, whereas if you do it quickly you're much less likely to.

    I've run a fogger off my system a couple of times, but then I have 420 Ah at 12v running a Xantrex ProSine 3.0. Gives me the ability to be easy about watching the generator- I can stop it to refuel during the show, and if a dust storm rolls in we don't lose the lights... also, by running the generator for short periods at high power rather than continuously at intermediate power, I save substantial amounts of fuel. I also have 360 watts of solar panels hooked up to it, to give things a bit of a shove as it were. At the end of last year's Burning Man we had so much fuel left over that we did Gas 4 Trash: take some trash home, and get free gas!

  6. #26
    Join Date
    Jan 2009
    Posts
    151

    Default

    my 1.5W RGB is rated at 200W and the 500mW RGB is rated at 120W
    1.5W RGB internal FB3 scanpro 30's
    500mW RGB scanpro 20's
    300mW 532nM scanpro 20's
    600mW RG 4 head

    Livepro + FB3XE

  7. #27
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Quote Originally Posted by thesk8nmidget View Post
    and how abouts would i measure this myself? im not the smartest when it comes to using my meter lol
    Just buy one of these, much easier:



    http://www.maplin.co.uk/Module.aspx?...C=SO&U=strat15

    Plug your extension into it, then everything into the extension (not as in the picture where its measuring 1 appliance only) and you'll have your answer (be careful not to overload the extension though).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •