UKLEM 5.5 Surfleet 2 Day event - 5-6th of December 09

[gashead]

There is 3 phase in the hall but no 3 phase breakers, there all single phase in the board. You will need to bring with you a 3phase MEM (old style (or maybe new style MEMII will fit??)) breaker to suit your current requirements for the Argon.

Scuse the ignorance chaps.. (I am from New Zealand you know) but wtf if a mem ? are we talking a 3 phase distro board with breakers and tales ?

It will be good to see you and the 168 there

I would love to be there! the beast is mixed gas btw, apparently you can squeeze 4 watts out of her at 32amps, its all a bit of a bstard really since it's a 203volt model I need to bring the tranny too, which is near 50kg's worth.. but should be worth it..

I have no PCAOM, but loads of GM20's so I should be able to cook something up..

Otherwise I'll be white only, which could be a bit boring...

[smogthemog]

Leave it with me, I will source the correct breaker for your needs - 32A 3 phase - and if it don't fit properly when we get in the hall, I do have a good 'fitting' hammer

A DG and prism's will make a white light laser look cool

[gashead]

Leave it with me, I will source the correct breaker for your needs - 32A 3 phase - and if it don't fit properly when we get in the hall, I do have a good 'fitting' hammer

A DG and prism's will make a white light laser look cool

Apparently startup current can be higher than 32A so maybe some headroom might be required.. I'll check the breakers on the tranny.. should be a good enough guide..

Cheers!!

Edit: I have a nice Star grating I bought of Rob, so I'll remember to bring that along.. have near on 12 GM20's and various drivers and dicro's so it should be cool. (unless anyone has a pcaom I can borrorw for the day(s) )

[smogthemog]

Anyone requiring accommodation for the weekend then I can recommend these:

http://www.shipinnsurfleet.com/Contact%20Us.htm

http://www.kingscountryhotels.co.uk/

http://www.browntofthouse.co.uk/

[smogthemog]

Good to have you back Chris and hope to you at Surfleet and with something new

[badger1666]

Good to have you back Chris and hope to you at Surfleet and with something new

yep i am back man with a plan,and gona start with 400mw of 642nm
just need my motorbike to sell then i can get buying parts

[andy_con]

ill probably sleep in the hall again if thats ok

[smogthemog]

No worries Andy - I am sure Bob will be with you with his bum out

[andy_con]

if i play my cards right he might...

[smogthemog]

If you play your cards right Andy, Richard might join you too