Results 1 to 8 of 8

Thread: DMX wireless Controller

  1. #1
    Join Date
    Jan 2009
    Posts
    151

    Default DMX wireless Controller

    for anyone using DMX ive found a wholesaler of DMX wireless Controller's.

    Model: DMX 1312 DMX wireless Controller
    Technology parameters:
    Frequency: 2.45GHz
    Transmit distance: 300m (Visible distance)
    Receiver: Maximum 16 receivers with one Transmitter
    DMX channel: 512 CHL (each receiver)
    Antenna: Helical SMA antenna
    Electric: AC100-240V, 50/60Hz
    Dimension: 153 x 147 x 41mm
    Net Weight: 0.5kg (with AC power supply)
    Specification:
    Use 2.4GHz W-LAN and not collide with any other machines at FHSS & TDMA W-LAN method.
    High gain & low cost with long transmit distance SMA antenna
    Select transmit channel freely between 2400MHz-2524MHz
    Each transmit channel has 512 DMX channels.
    Maximum 8192 DMX channels each transmitter.
    Multi transmitters can be used at same place at different transmit channel (different transmit frequency)
    Set Transmitter and Receiver convenient accord requirement.
    Professional and not replaceable product to control as much lights as you need
    Application: Architectural building, event and place where need to make comprehensive light effect.
    Base of W-LAN theory and relative IP knowledge, it can be known & used well quickly.



    http://mslighting.en.alibaba.com/pro...ontroller.html


    they are easy to deal with, sent price list within 5 minutes, problem is she sent it to a friend who is buying LED lighting off them. Ill try and get a price next week.
    Last edited by 2nd17th; 07-10-2009 at 21:00.
    1.5W RGB internal FB3 scanpro 30's
    500mW RGB scanpro 20's
    300mW 532nM scanpro 20's
    600mW RG 4 head

    Livepro + FB3XE

  2. #2
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default

    Is this a built in controller, or just a DMX transmitter? I already have a controller, but it would be awesome if I could get some wireless transmitters/recievers for a nice price

    I believe you only need one transmitter, and then it just acts like a wireless network, where you can set addresses on the separate receivers?

  3. #3
    Join Date
    Jan 2009
    Posts
    151

    Default

    added a pic

    its just a transmitter and receivers
    1.5W RGB internal FB3 scanpro 30's
    500mW RGB scanpro 20's
    300mW 532nM scanpro 20's
    600mW RG 4 head

    Livepro + FB3XE

  4. #4
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default

    Any rough estimates on price? <$100AUD?

  5. #5
    Join Date
    Jan 2009
    Posts
    151

    Default

    just waiting on an email
    1.5W RGB internal FB3 scanpro 30's
    500mW RGB scanpro 20's
    300mW 532nM scanpro 20's
    600mW RG 4 head

    Livepro + FB3XE

  6. #6
    Join Date
    Jan 2009
    Posts
    151

    Default

    each unit is $96 US. thats a transmitter or receiver, not both

    for 6 - 20 units its $90 US.
    1.5W RGB internal FB3 scanpro 30's
    500mW RGB scanpro 20's
    300mW 532nM scanpro 20's
    600mW RG 4 head

    Livepro + FB3XE

  7. #7
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default

    Hmm so quite expensive. Still pretty cheap considering what they are however, but a little out of my range ATM.

  8. #8
    Join Date
    Jan 2009
    Posts
    151

    Default

    its not to bad when you look at the cost of 300 metres of cable plus the time saved on an installation.
    1.5W RGB internal FB3 scanpro 30's
    500mW RGB scanpro 20's
    300mW 532nM scanpro 20's
    600mW RG 4 head

    Livepro + FB3XE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •