Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: 810 nm medical device

  1. #1
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,435

    Default 810 nm medical device

    This itenm is Sold to gogu.

    Would somebody here be interested in a medical device ?
    With fiber and delivery optics, adjustable aiming beam.
    Adjustable timing and power.
    <1.2Watts continuous.
    <3Watts pulsed.
    Shot counter.
    All kinds of nice optics inside
    Two IR diodes. PBS, wave plate, dichro, hene laser. Servo controlled attenuator for the hene.

    Can't guarantee any of the characteristics, but i used the laser on some CASIX cristals, and they light up instantly.

    Your offer is as good as mine.
    Last edited by -bart-; 08-19-2009 at 06:13.

  2. #2
    Join Date
    Jun 2008
    Location
    Yellowknife, NT, Canada
    Posts
    2,147,484,113

    Default

    What would shipping be like to the UK ?

  3. #3
    Join Date
    Jun 2008
    Location
    Yellowknife, NT, Canada
    Posts
    2,147,484,113

    Default

    Also, do you have any pictures of the guts ?

  4. #4
    Join Date
    Nov 2007
    Location
    Michigan
    Posts
    97

    Default

    What kind of price are you looking for?

    EDIT: Just saw the make offer listed below the photo.
    The Frothy Chimp
    Cynic Extraordinaire
    Back off man, I'm a scientist

    Good whiskey, fine cigars, long legged women and blues guitar.
    That's what I like.

    The strong shall stand, the weak shall fall by the wayside.

  5. #5
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,435

  6. #6
    Join Date
    May 2007
    Location
    The Netherlands
    Posts
    291

    Default

    nice setup
    dual tec cooled (probably coherent) p1 infrared diodes combined with a pbs
    can probably be temp tuned to produce near to 808nm
    any body want to try to convert this baby to green.

    sadly ive alreadt spend to mutch on laser stuf this month
    else i would pick it up

    are there any sdl xxx xxx numbers on those diodes ?
    Do not look into laser with remaining eye
    Need laser repair contact me !!!!!!

  7. #7
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,435

    Default

    Serial or type numbers can't be read because of the way the diodes are installed.

    Just found out that in endo mode, the power can't be increased beyond 1.2 Watts continuous mode. But I guess thats just a clinical limit. Not a thermal/electrical/optical limit judging on the setup.

  8. #8
    Join Date
    May 2007
    Location
    The Netherlands
    Posts
    291

    Default

    yes those diodes wil probably do more then 1.5 watt's each
    probably 2 or more since most medical lasers are run way under spec
    Do not look into laser with remaining eye
    Need laser repair contact me !!!!!!

  9. #9
    Join Date
    Jun 2008
    Location
    Yellowknife, NT, Canada
    Posts
    2,147,484,113

    Default

    It looks like a nice system, I'm very interested in it. I won't be able to buy it for at least 12 days as I'm in portsmouth just now ( on my way to france ). Anyone want a mini LEM while I'm here ?

  10. #10
    Join Date
    Jul 2008
    Location
    My momentum is too precisely determined :S
    Posts
    1,777

    Default

    Where in France? Do you bring lasers with you?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •