Hey all,
Please list your items FS or Trade that will appear on the table at SELEM.
This should get the siliva flowing before the event.
Hey all,
Please list your items FS or Trade that will appear on the table at SELEM.
This should get the siliva flowing before the event.
I might get the time to finish up a few red modules I've been meaning to put together... ~250mW a piece at a very attractive price!
Aside from that, I'll also have a couple argons that I'll want to unload, and perhaps an extra PSU or two...
Anyone want anything specific like some BluRay or red diodes?
--DDL
I suffer from the Dunning–Kruger effect... daily.
Anyone bringing a credit card processing machine?
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
Some 120mW 642nm adjustable height red modules as listed earlier,
Some FlexMods, FlexDrives
A Scientech optical power meter
A Beckman DU spectrophotometer for measuring wavelengths
3D Studio Max R2.5 with dongle
sound card and correction amp kits
RIYA micro, basic, and pro DACs
.
.
Last edited by drlava; 08-08-2009 at 08:08.
I'm bringing:
6 fresnel stage lights from the 1964 Worlds Fair.
Maybe a couple of old 5mw HeNe's
3 G125 open loop scanners and Amps
110vac 1 RPM Lumia motor no glass
12 vdc Rotary solenoids good for shutters
Anything else I can dig out of the attic.
Lazerjock
couple lasers. most likely:
(1) 640 ~300-400mw
(1) 532 no idea what mw
(1) 473 ~200mw
-optics
-4X4 bounce mirror assemblies
-4X4 Diff gratings (glass) (burst and linear)
-MM1's
anything else anyone want/need? ill prob bring a meter also. (up to 20W)
-Marc
ILDA- U.S. Laser Regulatory Committee
Authorized Dealer for:
- Pangolin Laser Software and Hardware
- KVANT Laser Modules & Laser Systems
- X-Laser USA
- CNI Lasers
- Cambridge Technology & Eye Magic Professional Scanning Systems
FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems
OK -
I'm REALLY not planning on going broke during / after this meet like I have others in the past, but the offers of argon lasers, diffraction gratings, etc. are making it difficult....
Just a thought on building materials -
Anyone driving that might need to offload some reasonable sized / priced 1/4" aluminum plate might find a market for it at SELEM.
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
I might have a "depleated uranium" case that is available... You could remove the welds and use it for parts.