Flexure mirror mounts.

[Laserman532]

I have a file written up in Alibre for a small 3 axis if you have a jig to hold the pieces...they are 12mm x 12mm x 8mm driven with 3 0-80 SHCS. Let me know if you would be willing to make a small run of these. I would bet they would sell......I need 8 pcs now. No CNC machine avail to me until mid Jan.

those are hard to make, here is my feeble attempt...only 4-40 now will probably go to m3 .5 or 0-80 still to be determined.

[chad]

I like the little mounts, but either you have to make them black or I have to make everything else RED

You guys and your black.... OK I promise if I do another batch I will make them purple polka dot on pink if that is what everyone wants!

Chad

[Laserman532]

You guys and your black.... OK I promise if I do another batch I will make them purple polka dot on pink if that is what everyone wants!

Chad

LOLOL - once you go black....

[chad]

chad,

that's some really nice work! any chance you could take a shot of one in use so a newbie like me can wrap my brain around it?

They are x and y adjustable mirror mounts. See pic (a picture is worth a thousand words.

chad

[dar303]

those are hard to make, here is my feeble attempt...only 4-40 now will probably go to m3 .5 or 0-80 still to be determined.

Very nice! How do you hold the two pieces together, with a screw in the center or using a spring?

[Laserman532]

Very nice! How do you hold the two pieces together, with a screw in the center or using a spring?

spring screw technology, very tight. I was just piggybacking the hijack by mecheng3 while we are on the subject of small adjustable mounts. My mount is .5 x .5" free plate .5 x .75 fixed plate.

anyway, i have some of chads mounts and they look great and every improvement that could have been made to the original brass one has been implemented. I hope to get light on them early next week for test. I have been told the next run will be black

EDIT- and not to further hijack thread...but I have the front surface mirrors for these little mounts. the prices here are retail - http://www.microlaserlabs.com/index....rrgdtkovqh5ad1 precision cut, new and any quantity you need IN STOCK.