In a private message to me, you mentioned that you measured the color signals coming out of the FB3 and you read xxx voltage. I'll be as gentle as I can here
. Sorry but... you can't measure color signals with a
meter. Color signals are pulsed waveforms, and a
meter will, at best, give you the average voltage. You need a scope to measure the voltages coming out of color lines, not a
meter.
Also, putting "just a point" into the drawing window will NOT give you a constant, unchanging 5V signal -- well, not from our software anyway... Our software does certain things "behind your back", and you will just have to trust that we know what we are doing, and the things that we do are for your own good
. And no, I won't comment on what we do or why, because we don't want our competitors to understand what we are doing or why