-
OK, next list!
Confirmed for the 20th:
-FLoWLASER (1W RGB)
-Stoney3K (0,6W RGV 20kpps projector, Chauvet 1250W fog machine and probably some small lighting kit)
-edison (RGB projector, fog machine)
-Frixxion (RGV projector and a laptop with soundcard DAC + HE)
-mccarrot (2 x 500mW RGB, new 2W RGB with 1 x 500mW green viasho, Qm.nets, Coherent fieldmaxII powermeter, technohaze)
-hobbybob (Mamba 2.0 and Easylase, 1W green?, power meter, luxurious Audi)
--bart- (two powermeters)
-JeroenVDV (1W green + QM.Net, several computers with touchscreens, 1x or 2x MDG3000, DMX controllers)
-SideFX (1W+ RGB and 2 smaller RG's, 2 FB3's + USB-over-IP setup, scientech 362 powermeter with thermal head, maybe some qm.nets)
-DixiScan (Antari HZ400 hazer and his 1W RGB, two 1W Greens, QM2000.Net, LivePro)
-laserwinkel (2x 1200W smoke machines, 500mW RGV laser, 600mW RGV laser, laserworld cs-150G so we can have a good laugh, chinese RG 240mW, chinese G 500mW, dmx controller, spectra-physics 168-35 5W whitelight
-ABSolute (2 QM2000.net and a 3W RGB)
-SrS (FB3, 500mw green, some new toys, Antari Z-1200 MKII DMX fog machine because we love smoke)
-jeejeedr (1W green, 100mW/400mW green/red, laptop with mamba and LDS)
-CMB (red and green modules)
Nice list.
Last edited by colouredmirrorball; 12-11-2009 at 13:05.
-
sorry guys no qm2000.net.I had to sell it to save for a 457nm blue
By the way for anyone who is not be able to be there to see my projector in real live click on the link to see some beautiful beamshots
http://www.photonlexicon.com/forums/...=edison&page=2
Last edited by edison; 12-11-2009 at 09:47.
-
It could be that my green is not back in time and i am currently very busy at work. Probably meaning this will be my second LEM i visit without a working laser ;-(
Anyway, i have a lot to learn, so better keep my ears and eyes open.
Really look forward to this. After the LEM 1 week of work and then HOLIDAY !
Then i will clean up my workspace and start building my lasers ;-)
I've had a tremendous jumpstart by Edison when i bought one of his excellent cases that will help me to built quickly a nice professional looking case for my green.
After that i will continue building on the new RGB, that will be fitted in one of Edison's excellents design's. This case will hold Laserwave , Kvant and Lasever lasers.
The new year will be laser-year for me.
-
Thanks hobbybob, i,m very happy with the new case. We added also 2 models from Viasho. But hounestly without SRS i couldn,t have done it!
He is realy the man to thank.The design of the case is mine but to get it manufactured i needed a drawing an he made an excellent one. It was a little bit comprimising sometimes but we are both happy at the end. 
-
Ofcourse, SRS is a real professional how could i forget him! The drawings you showed me were top notch, number one quality. Really look forward to the new case. Hope i can make it look as good as your current one (which is already a beauty). It's a shame i have so little time at this moment. Have so much ideas etc.
Really look forward to the LEM and meeting other people and seeing their projectors.
-
OK, we got tons of gear, and I think I'll have too much to do coordinating the whole lot anyway, so I may leave my (currently not-so) RGV projector at home for now. It's going to need some parts still, and my money supply has dried out for the holiday season. Would have loved to join you on the lase-off, though!
As for the lase-off rules:
Show entries should be no longer than 6 minutes, unless you have good reason to make a 15-30 minute long show. I dare you to explain to me over e-mail. Music for the shows at your discretion.
Lase-off scoring is by vote (I'll drop a few forms), each characteristic can get a score from 1 to 5. monochromatic projectors do not need to score in the white balance test for obvious reasons. Grand prize: 12 33cc bottles of Bavaria Pilsener, just don't drink and drive! 
I'm not sure if I can provide a screen or scrim for graphics projection, I'll see what I can do.
Laserwinkel: If you want your Spectra 168 fixed, make sure you get the neccessary components (32A male CEEform, 32A terminal blocks, 5x4qmm three-phase cable, crimp terminals to wire up the power supply), since I'm not going to cannibalize materials from the TAC tech supply.
-
-
Looking at the list of gear it would be a shame not to come! It is about 75 minutes drive from Den Haag but for me it really depends on if I make my Christmas deadline 
...... Hope to be part of this event!
-
I'll be bringing too:
- an all line ALC60 doing ~30mW with goldbox supply and a 220-110 transformer.
- a 60 cm HeNe + Supply doing ~30mW
Both need a new owner, because at my place they are taking space and gathering dust.
So if you're interested, please say so.
I prefer these to go to the best home not the best offer !
-
little gear change sold a few lasers and got a diffraction laser :P
2x 1200W smoke machines,
150mW RG diffraction grating laser
laserworld cs-150G
chinese RG 240mW
chinese G 500mW
dmx controller,
spectra-physics 168-35 5W whitelight
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
