Dimensions Medialas driver?

[edison]

Does any one have a medialas red or blue or both? I,m looking for the dimensions of their driver. If there is someone who has a datasheet could you help me with this?

Thanks

[ABSolute]

I have a DLR-1000UB and DLR-400UB, both have the driver build inside the laser, so just apply the 15V for the 1000UB or 12V for the 400UB and modulation signal and off you go.

Br,

Abondi

[JeroenVDV]

How about ringing or e-mailing Medialas....

[edison]

I tried email but they didn,t respond so this time i choose to use PL

And thanks to ABSolute this is a lot quicker

[ABSolute]

Be aware of the amount of heat a DLR-1000UB will create, it will dissipate around 40W continuously into the baseplate. So just a baseplate of 10mm or more won't cool enough!

[edison]

Thanks ABSolute nice to know that you thinking ahead for our new projector. Luckely we designed a bottom that holds 3 92mm fans next to eachother that will blow directly on the baseplate.

[ABSolute]

I have a baseplate made out of a 0.02K/W heatsink with 2 12cm fans and even that one gets quite warm after a night of continoues use... (there is also a 1W 445nm laser of RGB lasers on it which dissipates 40W and a 1W viasho laser)