Help! CT6800 need to add mirrors

[swisseuro]

I have 3 x CT6800 with 3 x 6580 Rev D amps, the only thing i am missing is the mirrors on these suckers, if anyone know how to add (i will pay for work and the mirrors) them or can point me in a right direction to find someone that can do it for me.

I am a little lost here, and from what i found out, with the CT6800 you have to be very precise.

Also if someone knows where i can get a mount for these, i have one but looks bad so i want to replace it, even a CAD drawing is fine, since i have access to a CNC mill and can make my own mount.

Just give you some info, i will never run more then 3 Watt over these, RGB most likely but 532 in the beginning. I am located in Los Angeles, CA. Great would be if i don't have to ship them outside the country.

[VJ AIWAZ]

one stop has 6800 mounts


http://www.onestoplasershop.com/hardware.htm

if you end up needing the XYB with the retro block i have one that i can part with

[sugeek]

one stop has 6800 mounts


http://www.onestoplasershop.com/hardware.htm

if you end up needing the XYB with the retro block i have one that i can part with

This.. Give him a call he will give you instructions and make sure you get the mirrors you want with the correct coatings.

-Adam

[VJ AIWAZ]

i think fred has a jig that he uses for doing the 6800 mirrors

[swisseuro]

who is Fred, may i ask...

[gottaluvlasers]

fred-

OSLS

Good guy!

-Marc