Page 1 of 11 12345 ... LastLast
Results 1 to 10 of 104

Thread: Fs: Laserman532 quad kit!

  1. #1
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default Fs: Laserman532 quad kit!


    PRICE SLASHED TO $320.00!!!

    For Sale Laserman532 Quad Kit - Beam Height Above Surface = 1"


    Features Explained-
    1 - One ea. 4" x 4" x .25" Black Anodized Base / Mounting Plate
    2 - Two ea. Dual Aixiz Mounting Module's featuring SLIDE, ROTATE & INSULATE Technology
    3 - Three ea. Ultra Small Adjustable Mirror Mounts by Chad
    4 - Two ea. .5" x .5" x .060 NEW Enhanced Aluminum Front Surface Mirrors
    5 - One ea. 10mm PBS Cube (specify 405 or 660 lasers to be used) (not shown)
    6 - One FLEXDRIVE Driver Circuit by DrLava
    7 - All necessary hardware to mount all the parts will be included
    8 - NO Aixiz Modules, Laser Diodes or Lasorb's will be supplied with this kit

    I have made a order of parts to build a few assemblies. I am not shooting for a galactic record for the smallest QUAD, that was not my goal. My goal was to supply all the necessary mechanics needed to hold aixiz modules securely, rotate each module independently, electrically isolate each aixiz module from each other, slide the module pairs with ease and to provide FULL TWEAKABILITY...I think I accomplished these goals with this kit.

    (international shipping add $10.00)

    Kits will be processed in order received.

    Thanks for looking!
    Attached Thumbnails Attached Thumbnails Quad Kit Complete.JPG  

    Last edited by Laserman532; 12-12-2009 at 07:23.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  2. #2
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    That looks first rate! Do you have any pics of what kind of beam profile the system gives?

  3. #3
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    How much for a fully operational; i.e. lasing? Red and BR?
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  4. #4
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by ElektroFreak View Post
    That looks first rate! Do you have any pics of what kind of beam profile the system gives?
    beam profile is dictated by the lasers you install. When aligned properly spot overlap should be easily achieved.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  5. #5
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by allthatwhichis View Post
    How much for a fully operational; i.e. lasing? Red and BR?
    My current plan is not to supply running machines. But it appears that there might be a market if someone who is better at building the modules and getting the electronics correct building something with my kit. I am WAYYY too slow with that part, and my experience with the DARK LIGHT SERIES sort of poked a hole in my rubber raft.

    If that person is out there...lets talk!
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  6. #6
    swamidog's Avatar
    swamidog is online now Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,752

    Default

    i am *really* looking forward to seeing what 600+ mw of 405 is like....

    i'm going to need some more glow paint.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  7. #7
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    4inches by 4inches...

    gee... thats a big old boy

    looks good though
    Eat Sleep Lase Repeat

  8. #8
    Join Date
    Jun 2006
    Location
    Charlotte, NC
    Posts
    1,125

    Default

    Quote Originally Posted by Laserman532 View Post
    7 - All necessary hardware to mount all the parts will be included
    Looks great and this, #7 is so important. I cant tell you how irritating it is to go to the hardware store with some weird laser mount trying to find the right threaded bolt or screw.

  9. #9
    Join Date
    Aug 2008
    Location
    Ohio USA
    Posts
    562

    Default

    more pics please!!!
    Lasers, Lights, Music, Action!

  10. #10
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by andy_con View Post
    4inches by 4inches...

    gee... thats a big old boy

    looks good though
    HUGE compared to EU standards But keep in mind...we are used to working on 65 Mustangs...not YUGOS!!!
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •