My measurement are done with a FieldmaxII with PM3 head.
For the green and the blue I used a extra good quality IR filter to filter out any left over IR.
The Red laser used is a dual setup of 1x 660nm LPC815 diode and 1x 655nm Sony SLD1239JL-54 combined with a laserwave combiner cube putting out 400mW with a 2,2mm beam 0,8mRad
The green laser used is a very stable 100mw 532nm green laser with only 300nW deviation.
The blue laser used is a 100mW 473nm CNI, this laser got a deviation of a few mW so these results are not that accurate.
Maurice