DIY solder reflow oven

This is my solder reflow oven I built with the help of Robin from www.die4laser.com

I've used an Auber instruments Model SYL-2352P PID temp controller that you can program to follow a temp profile over time.
  1. IMG 0152
  2. After reflow soldering
  3. After cleaning and laquer
  4. IMG 0150
  5. IMG 0154
  6. Servo door opener
  7. The pick and place robot
  8. the insides
  9. The little beast
  10. Thermocouples reading the board temp
  11. Before reflow soldering
  12. Fixture to hold the boards
  13. Getting organised
  14. Applying the paste
Showing photos 1 to 14 of 14