Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Lasorb connection conundrum...

  1. #1
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default Lasorb connection conundrum...

    Ok, so the datasheet for the Lasorbs says that they should be connected no further than 1cm from the diode.

    Well that would require it to be inside the Aixiz housing, but the Lasorb is too big to fit.

    So what does everyone else do about mounting their Lasorbs? Do you just mount them as close as reasonably possible?

    Any pics to show what you've done?

  2. #2
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

  3. #3
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    Quote Originally Posted by 300evil View Post







    freakin show off!!!!

    Dang those is sexy.
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  4. #4
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Quote Originally Posted by Laserman532 View Post
    freakin show off!!!!

    Dang those is sexy.
    Ha! Thanks! I wanted to get the lasorb a little closer so it would sit on the base of the modified Axiz module but the smallest soldering tip I had is only so thin.

    Now, if I only had the parts to build me a dual blue!


  5. #5
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default

    wait a while, i think dr lava will have a dual for about $40.00
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  6. #6
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Quote Originally Posted by Laserman532 View Post
    wait a while, i think dr lava will have a dual for about $40.00
    Na, I want a matching set. I'll wait for yours.

  7. #7
    Join Date
    Jun 2006
    Location
    Charlotte, NC
    Posts
    1,125

    Default

    Quote Originally Posted by 300EVIL View Post
    pictures
    but they still will not fit in the module barrel, correct?

  8. #8
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    Quote Originally Posted by dream beamz View Post
    but they still will not fit in the module barrel, correct?

    Correct.... although. You may be able to carefully sand off the casing just enough to make them fit.

  9. #9
    Join Date
    Dec 2008
    Location
    Southport, UK
    Posts
    2,746

    Default

    Acording to Pangolin's product video you just lose protection between the zorb and the diode; if that section is enclosed inside the barrel then there's no problem.

    But the barrel is just a codpiece anyway, it just sticks out and gets in the way.
    http://img62.imageshack.us/img62/3985/laser.gif

    Doc's website

    The Health and Safety Act 1971

    Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.





  10. #10
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Whats the additional resistor for?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •