Laserworld

[profilas]

so please show me cheaper comparable products...

[allthatwhichis]

so please show me cheaper comparable products...

O how I yearn to debate the worthlessness of LaserWorld projectors... with yet another LaserWorld representative...

[norty303]

So I guess you're one of the Laserworld resellers then profilas?

Really, 4k euro/£3.5k is WAAY too much for an 800mW RGY

[allthatwhichis]

Really, 4k euro/£3.5k is WAAY too much for an 800mW RGY

$4000 is too much...

[djlorenz]

i watched inside in 2 rs 400 rgy and in a 800rgy... there are the same two shit red diodes in each one

4000€ for a 800rgy? no more than 400€

[White-Light]

it's so funny to read stuff from peoples which has no much experiences with lasers....

I'm on the Laserworld Dealer List or at least I seem to be, so what does that say?

can't you reed the priceslist correctly?

the other 800RGY projector is a PL-800RGY and this one has 640nm red inside and it costs 4531€ (here too € not £!!)

Obviously you can't read the price list correctly either because its Euro 4,581.50 not Euro 4531!

You are correct, it is Euros not pounds, my error, but considering the exchange rate is 0.87 (XE.com) and after commission you're not going to get that, its not really significantly any different - still just over £4,000 (£4,004.12) for ONLY 500mw (guaranteed) 640nm at 0.87 exchange and no doubt more after exchange commission is factored in.

..and yes this model is named Purelight instead of RS. Same RS case - only difference is your now using 640nm and analogue lasers which is kind of pointless in my opinion unless you want 20 million shades of yellow.

Funny thing is I can buy 600mw of 640nm analogue red from Kvant for 995 Euros, probably the most Premium manufacturer in Europe. Kind of makes you wonder what justifies the Euro 1,700 uplift on the standard RS especially as you're no longer fitting the 650nm so save on that module as well.

[gottaluvlasers]

PROFILAS-

You are in VERY bad company here. Your product has PROVEN to be shit. your company has PROVEN to be shit. Your reputation has PROVEN to be shit. I didnt do that for you. Nobody here did that for you. Youtube videos didnt do that for you. YOU DID THAT FOR YOU!!

for a company to sit back and continuously blame its customers for their wrong doings is embarassing and pathetic!

trying to point out mistakes in exchange rates of a few dollars is again, utterly pathetic. How about we point out mistakes in output powers!!?? or is there an exchange rate that we are unaware of with Laser powers also!??!?

After all, we ARE a forum of laser hobbyists only and have NO technical expertise of REAL laser systems.

If i were you, i would very quietly and quickly disappear.

-Marc

[oliverst14@hotmail.com]

sorry to hijack this thread but marc i need to speak to u and have been trying to get in touch with you all day on email and msn and on here. contact me mate cheers

[soforene]

.... I think no intelligent person sells a laser for the listprice...

No intelligent person ever ever everbuys a Laserworld projector.
They are overpriced garbage !!

[oliverst14@hotmail.com]

just found this link to a 800mw rgy. iv already asked someone about this product on a thread i made about this company and they said the diodes were the right powers and the scanners ran overspec.

sounds better than laserworld already so here u go profilas what do u have to say to this
http://cgi.ebay.co.uk/800mw-RGY-DMX5...d=p3911.c0.m14
the only difference is the diodes are ttl not analouge but that shouldnt make £3000 difference

laserworld are the worst laser company on the market and should not be aloud to trade. i feel sorry for everone who has bought one on ebay and will never know how much thwy have been ripped off due to not having a power meter. i say power meters for everyone for free lol