PF-114 RGV 300mW ILDA - anyone own one?

[DJ SHACK]

hi im thinking of buying one of these laser but the pf115 ive seen on the pf lighting website. anyone know where i can get one form and if so, the price compared to the pf 114. i can get that for about 350 but not sure where to get the pf115 from cheers

[Doc]

Quote from post 27 in this thread:

"...I don't know if its the sloppy drawed animations programmed in, or if its the laser himself. but circles arent really round, lines are not pefect straight, and its flickering like hell......also the power dont seem like 300mW to me. can that be? but my brother's 15mW DX Greenie is brighter..."

Don't do it! Speak to Rob, get a real one.....

[LEDpaint]

hi im thinking of buying one of these laser but the pf115 ive seen on the pf lighting website. anyone know where i can get one form and if so, the price compared to the pf 114. i can get that for about 350 but not sure where to get the pf115 from cheers

Emailing the company that makes them would be your best bet for that info.

[Xer0]

hi im thinking of buying one of these laser but the pf115 ive seen on the pf lighting website. anyone know where i can get one form and if so, the price compared to the pf 114. i can get that for about 350 but not sure where to get the pf115 from cheers

Carefull, it weights 10 Tons!

Product Weight: 10.000 kg

[Gadget]

ATTENTION ALL PF114 OWNERS - Guess what its 15kpps not 30kpps as stated on the pf-lighting website! ( http://www.pf-lighting.com/2009en/in...imageField.y=0 )

They wont refund either! If I had have known I would not have ordered this model at all , I would have gone for the model up which is 500mw and 30kpps apparently. Took me about 1 month to decide asking qs's and searching every website I could find.

Well you get what you pay for but don't lie about the specs PF-lighting!!!!!!!!

[aijii]

how do you know the next model up is 30kpps ? i mean, did u just judge by the specs on the website ?

[Gadget]

how do you know the next model up is 30kpps ? i mean, did u just judge by the specs on the website ?

Sales dept told me after telling me they made a mistake in telling me this model had 30k scanners. I asked specifically for 30k scanners only

[dj howard dutton]

Sales dept told me after telling me they made a mistake in telling me this model had 30k scanners. I asked specifically for 30k scanners only

Gutted isnt the word, ive read the post, i too have just bought one and wish i had of read this before hand, i use pangolin quickshow and have it set about 15k to run clearly but have a lot of flicker.
Have you guys been able to upgrade the scanners to 30k or is it not possible, im very new so excuse me being thick.
I see also you had to adjust them, how and why, did you test, see and actually do it.
Someone also mentioned about turning them up to get them brighter? is this possible, if so how.
Yes im sry lots of questions.
I ordered mine firect from PF- Lighting cost of $250
Delivery $100
Pangolin Quickshow with FB3 $440

Any help would be greatly appreciated

[Xer0]

I sold mine :'(

(and made ~10-20€ loss compared to buy price due to ebay + pp fees)

[buffo]

Have you guys been able to upgrade the scanners to 30k or is it not possible, im very new so excuse me being thick.

Sorry I'm so late getting to this thread! But yeah, it's usually possible to replace the scanners with a faster set. That will improve your image quality a lot, and will also allow you to scan faster, which will eliminate most of the flicker you see.

If your schedule will allow it, I strongly suggest you attend the next UKLEM, which is coming up soon. (First weekend in October) There will be many experienced laserists present at this event, and they can give you excellent advice on which scanners to buy and how to install them. In fact, if you set it up in advance, it's very possible that you could get them installed at the event. Have a look at this thread for more details about UKLEM.

Someone also mentioned about turning them up to get them brighter? is this possible, if so how.

Tuning the scanners won't make the image brighter, but it will make it look better. Notice that "grid" test pattern? (The one that looks like graph paper?) Those lines should all be horizontal and vertical. The slanted lines you see are a sign that the scanners need to be tuned. However, since they are only rated for 15K speeds, don't expect miracles even if you get them tuned. You should be able to improve the look of the images, but you'll still have the flicker.

I ordered mine firect from PF- Lighting cost of $250
Delivery $100
Pangolin Quickshow with FB3 $440

That's a good price on the Pangolin FB3 w/ Quickshow. But yeah, lasers in general are an expensive hobby. That's changing now that 445 nm blue diodes are available for ~$50 or so, but scanners are still expensive, as are the controllers. And like anything else, you get what you pay for.

Still, don't be afraid to ask more questions. There is a wealth of knowledge here on PL, and we like helping people!

Good luck with your planned upgrades.

Adam