Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: First contact tape

  1. #1
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,319

    Default First contact tape

    Hey guys, i'm out of first contact tape.

    Is the first contact tape the only proper tape I can use to get the skin off properly or can I make use of other tapes too?
    The tape is really small too for say the apperture.

    Cheers!

  2. #2
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,206

    Default

    I've only ever used regular scotch tape.

  3. #3
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,319

    Default

    Quote Originally Posted by Bradfo69 View Post
    I've only ever used regular scotch tape.
    Did it leave residue?
    Did it work?
    Acording to the first contact site they use lint free tape.

    Did a search and found this: http://www.crystalmagicbeauty.com/product/html/?55.html

  4. #4
    Join Date
    Nov 2008
    Location
    Cleveland Ohio
    Posts
    2,613

    Default

    Scotch tape is lint free. Used it for years.

  5. #5
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    Ditto. Generic plastic tape works very well. For small or for highly curved surfaces use a tooth pic to press the tape well down over the entire surface to avoid leaving any of the First Contact behind.

  6. #6
    Join Date
    Nov 2007
    Location
    Cairns, Australia
    Posts
    1,896

    Default

    I've used electrical tape fine too.

  7. #7
    Join Date
    Jan 2012
    Posts
    291

    Default

    Hi PJ, i told you not to clean all the windows of your house, otherwise you would have not enough tape!

  8. #8
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,580

    Default

    I use scotch tape also


    Interested in 6-12W RGB projectors with low divergence? Contact me by PM!

  9. #9
    gashead's Avatar
    gashead is offline Admin Verified: Best Accent Ever(Tm)
    Join Date
    May 2009
    Location
    Burntisland, Scotland
    Posts
    899

    Default

    Ditto..

    If you read the PDF carefully:

    http://www.stanwax.plus.com/lw/first...structions.pdf

    "4. Remove cured First Contact™ Polymer by applying the special lint-free peel
    tabs at any film edge and lift the film. Lint-free peel tabs are provided with standard
    and deluxe kits or can be purchased separately. Alternatively you can use tape,
    such as masking tape or small adhesive labels. It is suggested you test the
    intended tape or label first to ensure its suitability
    "

    Scotch / Selotape works for me..

  10. #10
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Veet 'Lady Garden' waxing strips don't work so well...

    I've used Gaffa, electrical and masking tape, all with good effect. I've found the technique is more important than the tape for getting it off successfully.

    P.S. none of those tapes mentioned are much good for 'Lady Gardens', and usually just result in a lot of shouting.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •