Hello,
Yes, that is exactly what I did.
On this page: http://ether-dream.com/manual.html
In the "Firmware Updates" section, it indicates that there is a jumper that could be set internally. Would this help? Would I void any warranty?
ED
Senior Member
Hello,
Yes, that is exactly what I did.
On this page: http://ether-dream.com/manual.html
In the "Firmware Updates" section, it indicates that there is a jumper that could be set internally. Would this help? Would I void any warranty?
ED
Senior Member
Hello,
The instructions say "It should detect the Ether Dream, reset it, and put it into firmware update mode;".
After running the updater, I see the "busy" cursor but nothing is displayed in the programs window. After pressing the "Update" button, the button text greys out and nothing it printed.
ED
Jr. Woodchuckington Janitor III, Esq.
are you running win7 64 bit?
i just tried on my system and the lib-usb download from the ED website was failing to create the etherdream usb drivers properly.
i downloaded the libusb-win32-bin-1.2.6.0 from the source forge site:
sourceforge.net/projects/libusb-win32/files and created the etherdream driver. be sure to click on the
"Vendor ID 0xFFFF, Product ID 0x0005, Description "USBSerial""
entry in the list of devices. once i did that, and installed it, the ED showed up in device manage->libus-win32 devices->etherdream.
i ran the installer and heard the relay in the ED click. at that point, the ED is reset and ready for firmware update. run the installer again and you should get an "update" button. click it.
the actual update process only takes about 10-15 seconds.
Originally Posted by ekeefe
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Senior Member
Hello,
Yes, I am running Windows 7 64-bit.
I downloaded the libusb-win32-bin-1.2.6.0 from the source forge and ran it selecting "Vendor ID 0xFFFF, Product ID 0x0005, Description "USBSerial"".
I ran the "update-v0.5.0.exe" program. Once again, it ran for a second then made the update button available. The relay in the ED did not click. I clicked "Update" and nothing.
ED
Jr. Woodchuckington Janitor III, Esq.
does the etherdream show up under device manager?
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Senior Member
Hello,
Yes, under "libusb-win32 devices" is "USBSerial"
ED
Jr. Woodchuckington Janitor III, Esq.
ok. that sounds fine.
trying closing the updater and running it again.
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Senior Member
Hello,
I tried starting, ending and restarting the updater - still no reset or relay click.
Should the updater have any text on it? Mine just has a button.
ED
Jr. Woodchuckington Janitor III, Esq.
pretty much just a button.
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Jr. Woodchuckington Janitor III, Esq.
the update really should work at this point. i shot an email to j4cbo (the etherdream) creator and asked him to join in this thread.
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Posting Permissions
Reply With Quote