Selfmade 8W RGB projector

[norty303]

I just made a typical response to a post I found to be a spam post.

I fear this is part of the problem.

The responses to Chi-spam (which is not a particularly nice term in itself) are somewhat over the top and distasteful at times too.

Unfortunately it also set a precendent and for newer users like dream, this is now perceived as 'the normal' response to all stuff that smells a little of spam. Essentially, you created the monster.

Perhaps an opportunity to reflect on how we are responding to the real people behind these accounts in general.

[Laser Wizardry]

" 15 characters"

[Niklas92]

I could go on and give the reasons but we've hijacked this thread for too long, pm me if you want.

I think too.... it´s enough.
I need hours to read and translate your words


And now to the projector...

I have attached some pictures from the CNC design from the new housing.
The housing based on a "special" heat sink which is making by a CNC.
The outer walls are 10mm aluminium plates which will screwed which each other and the base plate. Between the walls and between the walls and base I will take a seal for waterproof.
All conectors I will use are water resist too.

For the electrical power I will use traco power supplys with 100w and 200w. The scanning system will be a PT A40K and a LAN switch and a integrated Netlase will placed in the projector.
So I can give the LAN forward to an other projector. Total of I will build five of this projectors to make bigger outdoor show with pyrotechnics...one projector is nice but a god show needs more I think

This is the bottom...If the housing is ready a plate will cover the fan and the heat sink.

Dimensions are 350mm x 230mm x 150mm

[djeric68]

"one projector is nice but a god show needs more I think"

From what I have read here on PL, Bradfo69 would agree and has enough projectors to attempt a GOD show! ( Just joking I know it was a typo. )


Niklas,

Good work on the projector. I wish I had access to CNC. All my metal work sucks because I use a drill press and hand tools. Your work looks great. Look forward to seeing more progress pictures.

Got any pictures of your pyro work to share?


Eric in New Orleans

[flecom]

ad or not I want to know what that red module costs

[drm916]

I sent them an email and I got a price sheet sent over. If you are interested then I can forward it to you. Just let me know.

[Laser Wizardry]

" 15 characters"

[drm916]

interested.....

laserwizardry@laserwizardry.com

sent it to you.

[Bradfo69]

From what I have read here on PL, Bradfo69 would agree and has enough projectors to attempt a GOD show!

Absolutely. God shows need LOTS of projectors. I'm in the mid 20's I believe. And that doesn't count all the Chauvet/American DJ winkie blinkie layzors, lumia rigs, beam rails and such.



But, I'm anxious to hear more about your pyro. I've spent a bit of time studying Le Maitre's stuff.

[Niklas92]

Ok, my mistake Of curse I wouldn´t (and can´t) make competition with god

At this time I don´t have pictures with pyro and laser together. I use this projector only two times with pyro, so far.
The next show I will make fotos and videos and share these with you .
Next weekend we do a pyroshow... If you want I can document the show and post it here . But the show will be without laser .

Also I have news from my CNC technican . The base from the new housing will mill in two weeks and then I start the conversion of the projector
I ordered five pcs of the base...next time I will build a few more projectors and I share to you .