Page 37 of 44 FirstFirst ... 27333435363738394041 ... LastLast
Results 361 to 370 of 434

Thread: SELEM 9 - August 12-16th 2015 - Sign up now!

  1. #361
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,535

    Default

    Kang - if you are still willing to help with setup, please come to the venue around noon on Wednesday. We can definitely use your help!

    My cell number is (843) 324-0735 if you need to reach me.

    Adam

  2. #362
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,535

    Default

    ARGH - I'm finally loaded, but I'm completely wiped out. I learned a valuable lesson though. If you rent a trailer from U-Haul, test the roll up door to be sure it goes down before you leave the lot! I loaded the whole damned trailer before I discovered the door was jammed and would not close. And by that time the place was closed, so I was really screwed. Fortunately after a lot of prying with some channel-locks (and a lot of swearing as well), I got it worked loose enough to see that there was a fitting that was jammed against the back of the trailer. So I took the bolts off and let the fitting fall into the door track. It's ghetto, but it worked! No idea what that fitting was for, but I figure that's U-Haul's problem, not mine.

    Unfortunately I did not have room to pack my DMX scanning-mirror light fixtures. (Sorry Newlin!) But I was able to bring just about everything else I wanted. Now I just need to get some sleep!

    See you all tomorrow for load-in...

    Adam

  3. #363
    Join Date
    Sep 2014
    Location
    Colorado, USA
    Posts
    172

    Default

    Quote Originally Posted by buffo View Post
    Kang - if you are still willing to help with setup, please come to the venue around noon on Wednesday. We can definitely use your help!

    My cell number is (843) 324-0735 if you need to reach me.

    Adam
    If you want my help in the morning till afternoon I'd be happy but I don't have a ride until Rodney comes by with his rental car. Glad to hear your door got fixed in your U-Haul! Duct tape does wonders ;D

    ~Theo

    - - - Updated - - -

    Quote Originally Posted by buffo View Post
    Kang - if you are still willing to help with setup, please come to the venue around noon on Wednesday. We can definitely use your help!

    My cell number is (843) 324-0735 if you need to reach me.

    Adam
    If you want my help in the morning till afternoon I'd be happy but I don't have a ride until Rodney comes by with his rental car. Glad to hear your door got fixed in your U-Haul! Duct tape does wonders ;D

    ~Theo

  4. #364
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,206

    Default

    At the venue!!!! Got here shortly after 7 and am having a power nap. Well.... Trying anyway. It's hard with a the hot chicks running around this early in the morning. Seriously! I'm guessing they're teachers but, we've missed the boat by not inviting them to check out the lasers. Been a few cuties walking around and going in and out of the cafeteria.
    PM Sent...

  5. #365
    Join Date
    Jan 2014
    Location
    North Carolina, USA
    Posts
    220

    Default

    Quote Originally Posted by Bradfo69 View Post
    At the venue!!!! Got here shortly after 7 and am having a power nap. Well.... Trying anyway. It's hard with a the hot chicks running around this early in the morning. Seriously! I'm guessing they're teachers but, we've missed the boat by not inviting them to check out the lasers. Been a few cuties walking around and going in and out of the cafeteria.
    That's the whole reason I am coming... I was promised there would be ton's of hot chicks everywhere oohing and ahhing over the lasers and the men that drive them!

  6. #366
    swamidog's Avatar
    swamidog is online now Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,803

    Default

    Quote Originally Posted by buffo View Post
    Swami: At this point just bring one. They're small enough not to matter on bag size or weight, and Brad *needs* it for a build he intends to complete at SELEM.

    Adam
    two z-bolt heatsink mounts packed for brad.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  7. #367
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Quote Originally Posted by Bradfo69 View Post
    ...It's hard with a the hot chicks running around this early in the morning. Seriously! I'm guessing they're teachers but, we've missed the boat by not inviting them to check out the lasers. Been a few cuties walking around and going in and out of the cafeteria.
    I'm thinking it's cheerleader camp -
    And your old enough to be their dad...
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  8. #368
    Join Date
    May 2013
    Location
    Fort Mill, SC
    Posts
    556

    Default

    Quote Originally Posted by Stuka View Post
    I'm thinking it's cheerleader camp -
    And your old enough to be their dad...
    I say if they are 18 and willing to sign the wavier game on. LOL
    Watching Lasers Since 1981

  9. #369
    Join Date
    Jan 2014
    Location
    Los Angeles, California
    Posts
    210

    Default

    I say leave them for the 20 year old
    Freelance Laser Operator in L.A.
    -


  10. #370
    swamidog's Avatar
    swamidog is online now Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,803

    Default

    Quote Originally Posted by AnthonyGarcia View Post
    I say leave them for the 20 year old
    I count as two twenty year olds... <Spock eyebrow>

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •