RGBV laser

[buffo]

You're talking about the interlock loop, right? (Pins 4 and 17)

You need to put those two pins in series with your interlock circuit. That way if the ILDA cable is unplugged from the projector, the circuit will be broken, which trips the interlock and shuts down the projector. (Remember that pins 4 and 17 are connected together internally on the QM-2000 board.)

Have a look at this drawing for an example of a basic interlock circuit.

Adam

[djmatt]

You're talking about the interlock loop, right? (Pins 4 and 17)

You need to put those two pins in series with your interlock circuit. That way if the ILDA cable is unplugged from the projector, the circuit will be broken, which trips the interlock and shuts down the projector. (Remember that pins 4 and 17 are connected together internally on the QM-2000 board.)

Have a look at this drawing for an example of a basic interlock circuit.

Adam

Ok thanks!!
I wasnt going to use relays,or do I have to?
Ahh! Im so comfused now

djmatt

[Stuka]

For sure... If you can convert an old fart like Randy (who only listens to classic rock), then you've really accomplished something!

Eh - I guess that wasn't fair to Randy. After all, I *did* see him bouncing his head to the side at FLEM 5 a couple times when we had some dance music playing... Maybe all hope is not yet lost for him! (Where's Soforene with his "Stukey and the Buffo" thumbnail when you need him?)

...

Adam

HEY - I resemble that statement.....

Haha!!!
...
I was playing with live pro, with some of them too!!!
But what I really want to do is run Pangolin off my synth,or better yet my turntables!!!!
...

djmatt

You're in luck - both LIVE (Showtime) and LivePRO support MIDI IN -
Dude, you're going to be out of control once you get everything going!!

I can see it now - DJMatt, the Howard Jones of Trance n' Lasers !!

[buffo]

Ok thanks!!
I wasnt going to use relays,or do I have to?
Ahh! Im so comfused now
djmatt

Give me a call when you feel up to it and we'll chat about it. It's not hard - trust me!

Adam

[djmatt]

HEY - I resemble that statement.....



You're in luck - both LIVE (Showtime) and LivePRO support MIDI IN -
Dude, you're going to be out of control once you get everything going!!

I can see it now - DJMatt, the Howard Jones of Trance n' Lasers !!

Oh yeah!!!
Ill give it a try when I get my new rig up and running!

djmatt

[djmatt]

Give me a call when you feel up to it and we'll chat about it. It's not hard - trust me!

Adam

Ok! Will do!!
Thanks!!
I think im making it harder that it is!

djmatt

[soforene]

.....I think im making it harder that it is!

You're also bastardizing the English language and slipping in a double éntendre.

But that's just ole Captain Pedantic at work.

[djmatt]

You're also bastardizing the English language and slipping in a double éntendre.

But that's just ole Captain Pedantic at work.

????


djmatt

[djmatt]

Well I got my toys...oh I mean my lasers today!!! (Thanks Marc!!)
Well I've burned myself about three times so far, and was lighting the tree up in the backyard nicely And yes, I made sure where the beams were going!
Heres the layout so far!


djmatt

[mophead]

Kickass.