Post your interesting eBay finds...

[Stoney3K]

These look like some tiny HeNes... anyone interested?

http://www.ebay.com/itm/C80325-Lot-3...item5ae4ba5858

[sugeek]

http://www.ebay.com/itm/COHERENT-INN...-/300654286776

Located in Clover, South Carolina - Buffo you know you need it, it even comes with the remote! Or maybe matt... Read Jon's response below, it might make a good paperweight! I saw the price I posted a link ;P I know the remotes are hard to get with this model of laser, and that that price resell the remote and use it for a boat anchor at FLEM!

[dsli_jon]

...you know you need it, it even comes with the remote! Or maybe matt...

According to the Model#, I believe that's actually a Krypton UV - most-often, the 'industrial 300's out-there FS are gonna-be UV, more-typically Ar-UV, but those are like Model 325/328, etc... if it's a WL or show-caliber Ar / Kr 300, those were typically branded-as Skylights, etc..

..Yes, you *can* change the optics on these heads, but still, tubes / heads set-up for UV-werk usually have special-mag-settings via the PSU EEPROMs / MB, and even bore-size differences, etc ..So, not sure this puppy would be all that Gr8 for light-shows... but, I could also be completely-wrong (..as-to what tube is actually in this head..)...clearly, from the notes on that one pic, this head has had at least one 'tube-job'..

..I'm sure 'The P'fessor' could weigh-in as-to the merits of at least attempting to do something with this sys - especially, as you point-out, at that price... that's worth-it in PSU-parts alone! (..solid brass proteus-assy, contactors, sub-PSUs, optics-holders, etc..)

..If anyone is looking to get an ion-fix, there's always these: http://www.photonlexicon.com/forums/...054#post213054 - ..and, I *know* I can say, with 150%-surety, they're "Gr8 for light shows"...

fwiw... ..but you still get points for trying to-be helpful...
j

[StarryEyed]

Hey,
Big Laser anyone?
http://annonces.ebay.fr/viewad/LASER...coherent+laser

StarryEyed

[laserwinkel]

Hey,
Big Laser anyone?
http://annonces.ebay.fr/viewad/LASER...coherent+laser

StarryEyed

700 Watts @ €899, unluckily it is invisible light

[steve-o]

Could this be used in the construction of a high power 532? Pumped w/808.. or, is it missing the ND:YV04 .. Wonder how many watts of 808 it could take..
http://www.ebay.com/itm/Coherent-Sel...item3cc17da12f

[dsli_jon]

Heya Steve-o

..or, is it missing the ND:YV04 .. Wonder how many watts of 808 it could take..

Yeah, you'd need to pump it with 1064 to get any green, not 808... ...but: "..Some mysterious words were written on its surface in ballpoint pen by a child of unknown origin." Lol!! ..I'll bet that kid got his hide 're-polished and re-coated'!...

cheers..
j

[djmatt]

http://www.ebay.com/itm/COHERENT-INN...-/300654286776

Located in Clover, South Carolina - Buffo you know you need it, it even comes with the remote! Or maybe matt... Read Jon's response below, it might make a good paperweight! I saw the price I posted a link ;P I know the remotes are hard to get with this model of laser, and that that price resell the remote and use it for a boat anchor at FLEM!

Haha!! Yes I saw this one too..lol But theres a few red flags that popped up for me..
1. It has a built in CPU, and if theres something wrong with it, it could take months to fix...
2. The amount of hours on..
But it could be nothing wrong with it, other than optics..lol!! Never know!!

[dsli_jon]

..built in CPU, and if theres something wrong with it, it could take months to fix...

..unless, you've got a Pal on the West Coast that happens to have a couple motherboards for these (..well, just swap eeproms and two other socketed ICs..) ..just sittin around, all lonely-like, collecting dust...

..but, seriously, in-spite of the 'temptation', I'd have a good chat with P'fessor Roberts on his-thoughts about tryin to 'convert' these to VIS-Kr, *if* this tube, is indeed, set-up for UV.. I seem to remember something, in-particular, about UV-tube magnet-settings that would cause 'issues', even-if you could just-up and swap the optics.. I know it does with Sabres...(..trying to use a VIS-tube in a UV-head...)

iirc...

peas..
j

[djmatt]

lol!!! Thats why I let it go...lol
Right now Im trying to breath life back into my I-90 PSU so I can try out my I-90 argon. Its the one that ran my I-90Kr. (may it rest in peace..lol).
Did get the PSU to run up another I-90 head, but full current..