Results 1 to 9 of 9

Thread: A laserworld RS1000RGBV with flightcase

  1. #1
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    28

    Cool A laserworld RS1000RGBV with flightcase

    Take it easy and lets see how this goes I know the vibe on here with these but have one to let go this was a backup unit this one was used at home for preview about a few hour's tops works great looking to get $1700.00 (paypal or money order/bankcheck) plus shipping USA only, will be as in pic's with power cord,safety cable,key's,remote lock when shipped I will remove the wheels and put them inside the flightcase if they will fit or I'll have to leave them on. I can also include a 4ch Badpip driver I will put in the flightcase so if you want to upgrade the BV diodes and red's to M445 and 635. Some pic's runin in auto mode.
    Attached Images Attached Images

  2. #2
    Join Date
    May 2011
    Location
    Nevada City, CA
    Posts
    167

    Default

    Looks like a nice unit.. But WHY do they put status LEDS under the lasers output port?

  3. #3
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    28

    Default

    Left to right, operation LED, working LED:controlboard work, DMX LED: DMX connected, ILDA LED:ILDA connected.

  4. #4
    Join Date
    Sep 2009
    Location
    Brno, CZ / Povazska Bystrica, SK
    Posts
    491

    Default

    specs and measured output values might help you with the sale... just sayin' because of the reputation of these units

  5. #5
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    28

    Default

    I don't have a power meter I can only give the values from the manual :max1000mW,>150mW532nm,>350mW655red,>250mW410(+/-5)nm blue looking through the output window they do have fully adjustable mirror mounts not just an angled pieces of metal. These units are not that bad like I said I picked up 2 of these at the same time in end of 2010 this one is the spare I was going to upgrade them both but then decieded to unload the spare and upgrade the main one.I know the rep on these but they work good for house/school/wedding gigs I run mine on LD/QM basic. Would rather see this unit get used instead of sitting in my closet. Can also send offers, Thanks.

  6. #6
    Join Date
    Jun 2009
    Location
    The Woods, CA, USA
    Posts
    535

    Default

    Can we see her with the top off?

  7. #7
    Join Date
    Jan 2013
    Location
    Santa Rosa, CA
    Posts
    133

    Default

    Quote Originally Posted by Picasso View Post
    Can we see her with the top off?
    Yes, show us her goodies!

  8. #8
    Join Date
    Feb 2007
    Location
    Fort Mill, SC USA
    Posts
    1,521

    Default

    Quote Originally Posted by dzodzo View Post
    specs and measured output values might help you with the sale... just sayin' because of the reputation of these units
    I have to echo this as I just gutted one of these units last month and rebuilt it from the ground up. It was rated 480-600 mW but actually only produced 216mW, 195mW of which was red. Considering LaserWorld's lackluster reputation I really think measuring the actual output is critical for any prospective purchaser. Otherwise, it could be considered as a nice case with some salvageable parts. (On my unit, I was able to salvage two of the PSUs and the red diodes in addition to the case, although the galvos could also have been saved as well.)
    "Help, help, I'm being repressed!"

  9. #9
    Join Date
    Sep 2010
    Location
    Florida
    Posts
    28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •