
Originally Posted by
mixedgas
There is/was this fellow named Dr. Pierre Brosens who is/was early team member or co-founder of GSI.
Long ago as an undergrad I was delighted to find one of his papers in the library on optimal open loop control.
I doubt I can draw the curve correctly but the frequency response graph had three regions as frequency increased.
That is a 30 year old memory. So take with a grain of salt.
There was a method in the paper of taking a specified width pulse at 1/2 the amplitude of the command signal, inverting it, and adding it to command to put the brakes on any resonance and thus stop the motion quicker.
The paper is behind a pay wall now and I really doubt I have a 30 year old photocopy of a two page paper.
From Left to Right, Linear, Resonant, and Ballistic.
So besides the integrator you add a very narrow bandpass with a lot of gain (Or invert a sharp notch* ) at where you want your resonance.
Steve
Thanks Steve. I may have that paper, I'll check my GSI folder. I can attest from experience that the G-115 open-loop galvos resonant frequency peaks in the 40hz range, and sending a 45hz -90hz square wave to the XY inputs where one axis is slightly off in frequency to the other resulting in the slow, phase cycling image was one of my favorite effects using 1:1 and 1:2 XY ratios. I been intending to make some "modern day" videos of this but can get a roundtoit.
________________________________
Everything depends on everything else