check pics above
Senior Member
Creaky Old Award Winning Bastard Technologist
is that the storage one with 4 plugins? the 7603?
Steve
Senior Member
i ordered probes.. whats the EXT BLANKING INPUT for?
and why is there a CH1 OUT (both are on the back)
Quis custodiet ipsos custodies?
Solid State Builders Group
THIS USER WAS CLUEBYFOURED
The 7603 uses plug-ins. It has room for 3. I have one time based and two voltage plug-ins. It's nice because I can have up to 4 traces at once. There is a mainframe 7603 that is supposed to be rackmounted. Is that what you were asking? I have the normal type that you can haul around.Originally Posted by mixedgas
Keeperz, ext blanking is probably same as laser blanking. It lets you use an external signal to vary the trace intensity. Not sure what CH1 out is for.
Last edited by carmangary; 01-15-2009 at 11:03.
Senior Member
well the guts are clean, very little dust
Quis custodiet ipsos custodies?
Solid State Builders Group
Creaky Old Award Winning Bastard Technologist
I had one step up from that 7603 where I used to work. loved that 1 ghz storage scope.
Steve
Creaky Old Award Winning Bastard Technologist
external blanking can turn off the beam ( ie +5 to blank)
That is your blaming and intensity control for the scope when using laserboy etc ie its Z in, brightness. Its inverted.
and channel 1 out is a normalized and amplified +/- 15 V (check the manual on that, may be hotter) output of whatever is on channel 1 , for chart recorders, data aquisition etc, Its a lab thing, ignore it.
Senior Member
Creaky Old Award Winning Bastard Technologist
What, no scopetris or Zoof Pong yet?
more importantly are you happy with it? Are you learning? Isn't P31 phosphor green the most irritating color second only to 532?
Steve
Last edited by mixedgas; 01-15-2009 at 18:59.
Senior Member
Nice, looks like a good buy
Posting Permissions
Reply With Quote