WTB - Newport MM-1's Wanted Dead or Alive

[Laserman532]

Wanted Dead or Alive* Newport MM-1's that are surplus, frozen knobs, twisted, broken and contorted springs, stripped out drilled out junkers or even ones you have that are surplus that work and you would like to sell. I will be chopping these up to use the screws and salvageable parts for a new and exciting project. Cant tell ya, cus I'd have to kill ya PM me with quantities and what you would LIKE for them. cant pay alot for them but you could play a part in a wonderful art project I would even be interested in clones if those show up.

[Laserman532]

Just to clarify...over on LPF not everyone knew what a mm-1 was so here is a picture of what I am looking for.

[300EVIL]

I know BMI surplus has a whole crap load of them. You may want to check that out.

[Laserman532]

I know BMI surplus has a whole crap load of them. You may want to check that out.

nope they gots zero (send me the link in case I missed them)

[Skyko]

I have a ton of MM1 type mounts, a lot with optics on them, but it would seem a shame to destroy them just for screws...

How many screw parts did you need?

[300EVIL]

nope they gots zero (send me the link in case I missed them)

You won't find them on their website. I've seen them in person.

[Laserman532]

ok 300 i'll call them on monday and see what they have to offer, I notice they are selling mm-2 for 35 or so bucks. I need to get a bunch for about 10 ea. I prefer mm-1s because that is what i am designing this new project for each project will need about 6 to 10 mm-1s. I prefer mm-1s because I can keep the machining somewhat logical.

to skyko- dont wreck anything apart on my account- if you have surplus you want to get rid of let me know. I have the technology to repair the springs therefore I'll take damaged ones. (most the springs on mm-1s are fried if they were used to any extent) On one of these parts I cut the screw threads out because it is cheaper than milling one.

Clones are ok but as i stated above for 300 why I prefer mm-1s- is for consistancy for machining. (keep variables to a minimum)

[DZ]

I could always use a couple MM-1's, you have any good ones you want to part with Skyko?

[hologeek]

Yo Laserman,

Don't know if you want to trade...but I have about 20-30 Newport 1" 80 tpi screws...

Trade for more of those SP G-3845-001 hene mirrors or similar if you still got em.

Let me know

[Laserman532]

Yo Laserman,

Don't know if you want to trade...but I have about 20-30 Newport 1" 80 tpi screws...

Trade for more of those SP G-3845-001 hene mirrors or similar if you still got em.

Let me know

its funny, i had about one million of those mirrors, you know I was selling packs of 20 for years, I gave/ sold sam a small boat load of them. Yes we will make a deal for the screws and I will also take any other parts you have, Why do you have just the screws (I mainly use the threaded part) but Im desperate I'll take anything! PM me with quantity & price required- Ill check around for laser mirrors what wavelengths do you prefer?