10k 50mW Green Scanner Build

**allthatwhichis** · 01-21-2009, 14:02

Yea. my 4x 405 is doing 75mW at around 100mA and the one in my "pointer" is at 110mA and 100mW.

**lamborgini8** · 01-22-2009, 14:38

Back on original topic...

Im getting the components mounted on the base plate tomorrow

Pictures on the way.

**Anthony** · 01-22-2009, 22:36

Originally Posted by lamborgini8

Back on original topic...

Im getting the components mounted on the base plate tomorrow

Pictures on the way.

WE love pictures!!!!!!

PS: powerproblems solved.
It looks like my dummy load is defective so i was "under" powering the lasers.. :-)

**lamborgini8** · 01-23-2009, 00:55

Originally Posted by Anthony

WE love pictures!!!!!!

PS: powerproblems solved.
It looks like my dummy load is defective so i was "under" powering the lasers.. :-)

Patience my friend

I have to wait till after 5PM so I can use the pillar drill because I am not alowed to use it for personal use during work hours.

**lamborgini8** · 01-23-2009, 11:40

Ok parts are mounted

There are a few mistakes like 2 holes not lining up for the DMX board but its being held by 2 screws and its pretty secure, I somehow missed a screw hole on the PSU so that's being held in by one screw and the holes for the galvos are too small.

I need to fix that and get the laser head mounted and its all ready for the enclosure.

**lamborgini8** · 01-28-2009, 11:55

All holes fixed and components mounted. Next step is wiring it all up and placing it inside its enclosure

**ledfreak3d** · 03-12-2009, 03:15

nice build looks great

**RGbee** · 03-12-2009, 06:57

Good job. What are you going to use for your casing

Thread: 10k 50mW Green Scanner Build

Thread Tools

Posting Permissions