Laserscope Modification Just Finished!

[zippo]

prodjallen is asking for help, and he's getting an ass pounding from every swinging dick in town.. pffff. people.
On another note, AQUAFINA, the taste of purity

[heroic]

prodjallen is asking for help, and he's getting an ass pounding from every swinging dick in town.. pffff. people.

This is because he's asking for help *after* doing illegal and dangerous laser shows.

[Phredy1]

This is because he's asking for help *after* doing illegal and dangerous laser shows.

And because he has shown no commitment in waiting until he is safe and legal to do more shows.

My $0.02 worth

[gottaluvlasers]

...and becasue he has asked me for help and ignored it...

he has asked pat for help (laserman532)....and ignored it....

he has asked mixedgas for help.....and ignored it.......

he has asked other people on other forums for help.....and ignored it....

he has tried to cut corners on the little bit of help he has received.

he tries to say that his way is better than the right way. he boasts and brags about equipment that he "supposedly" has that he remotely doesnt even come close to.

hes a kid who got a few extra dollars that found a good deal on a vag burner on e-bay and then expects to be a professioanl laser comany by having other people answer ALL of his questions and do all of his work!!

these are questions and reports and inquiries and equations and posts and threads and schematics that should have been researched and figured out PRIOR to bringing a 40W KTP yag laser into commerce and then back peddling your way out of the illegal aspect of it.

-Marc

[buffo]

How would I be able to measure the divergence?

This calculator is a handy tool. Make sure you wear goggles when performing the measurements.

Then for when in Q-Switch what would the energy in Joules be? Peak power in Watts? pulse duration? and repetition rate? This is where i'm having some trouble and need help here...

That's information that would be specific to the Laserscope. I don't really have any information on them. Pat or Steve would know.

Can this product report (variance) be sent in by the esub? instead of writing all this information manually, because right now i'm writing by hand...?

I don't think so. I believe the product report *and* the variance report have to be filed as paper copies. Once you have your variances, you can file the annual report via the e-file system though.

Adam

[weartronics]

How would I be able to measure the divergence?

Technique for measuring the divergence using an ordinary power meter:
http://www.photonlexicon.com/forums/...7&postcount=16

My result for a similar Laserscope machine (using the above technique):
http://www.photonlexicon.com/forums/...ad.php?p=83492

[carlos3621]

I gotta hand it to you Buffo, you sir,, have alot of patience, and will go to greater lenghts in order to educate the less informed.....

[prodjallen]

Thanks a lot for the info guys, ill try to get my hands on a good coherent power meter with maybe a ~100w sensor or maybe borrow one I saw some for cheap...

[dream beamz]

what's he getting? What it going to be used for?
Nice!

Funktion1 sound system, basically what its king of sound right now

[prodjallen]

As sound goes I personally like the SRX series best for my application, I have 4 single 18" bass bottoms (718's), and 4 15" single full range (715's), and run them of the Powerlight and PLX3602 Amps...